7 June 2022 in The European Journal of Research and Development
In this study, the thermal energy performances and environmental effects of two different reinforced concrete structures, Pure Shear Wall (PSW) Building and Shear Wall-Frame (SWF) Building, were investigated in the climatic conditions of Elazig province. Thermal performance analysis for both buildings; was carried out with the TS 825 program. First of all, through this program, monthly and annual heating loads were determined for 11 different alternative building component scenarios of two different buildings. Subsequently, efficiency alternatives were created in accordance with the climatic conditions of the region and TS 825. Efficiency alternatives designed for both buildings have been analyzed together with their completely uninsulated and current states. Finally, buildings with reinforced concrete carrier systems, energy analysis methods and efficiency alternatives were compared and evaluated based on the results of the analysis. As a result, it has been observed that the building with the PSW system consumes more energy than the building with the SWF system when it is uninsulated and in its current condition.
30 September 2026 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Bu çalışmada, Elazığ ili iklim şartları dikkate alınarak “Salt Perdeli” ve “Perde-Çerçeveli” olmak üzere iki farklı betonarme taşıyıcı sisteme sahip binanın ısıl enerji performansları ve çevresel etkileri karşılaştırmalı olarak analiz edilmiştir. Analizler Bin yöntemi ve DesignBuilder simülasyonu kullanılarak yapılmıştır. Her iki bina için verimlilik alternatifleri ve enerji analiz yöntemleri de bulgular üzerinden karşılaştırılarak değerlendirilmiştir. Bulgular, yalıtımsız ve mevcut durumda “Salt Perdeli” binanın daha fazla enerji tükettiğini; ancak TS 825’e uygun verimlilik senaryolarında “Perde-Çerçeveli” binanın daha yüksek saydamlık oranı nedeniyle daha fazla enerji harcadığını göstermektedir. Ayrıca Bin yöntemine göre mevcut binaya kıyasla “Salt Perdeli” binada %22.53’e kadar, “Perde-Çerçeveli” binada ise %7.45’e kadar enerji tasarrufu sağlanmıştır. DesignBuilder yöntemine göre ise bu oranlar sırasıyla %12.29 ve %8.75 olarak bulunmuştur.