The carbonophosphate Na3FePO4CO3 was synthesized by the mechanical ball milling method for the first time. The composition of the obtained sample with a higher amount of Fe2+ was Na2.66Fe2+0.66Fe3+0.34PO4CO3 as confirmed by Mössbauer analysis, owing to the good airtight properties of this method. The obtained samples in an organic electrolyte delivered an initial discharge capacity of 124 mAh/g at room temperature, and a larger discharge capacity of 159 mAh/g (1.66 Na+/mole) at 60 °C. With 17 m NaClO4 aqueous electrolyte, a discharge capacity of 161 mAh/g (1.69 Na+/mole) was delivered because of the high ionic conductivity of the concentrated aqueous electrolyte. During the charge-discharge process, the formation of Fe4+ after charging up to 4.5 V and the return of Fe2+ after discharging down to 1.5 V were detected by ex-situ X-ray absorption near edge structure (XANES) analysis.
This paper describes how to control strip gauge, looper angle, and strip tension for a hot strip finishing mill and the application result. This is based on the optimal servo theory and the model decoupling method. In the finishing mill process, there exists mutual interaction among strip gauge, looper angle, and strip tension. Conventionally, each of them is controlled independently. To improve the control performance, multivariable control considering this interaction is applied to all production.
28 June 2017 in Journal of Geophysical Research: Space Physics
A system to optimize the management of global space-weather observation networks has been developed by the National Institute of Information and Communications Technology (NICT). Named the WONM (Wide-area Observation Network Monitoring) system, it enables data acquisition, transfer, and storage through connection to the NICT Science Cloud, and has been supplied to observatories for supporting space-weather forecast and research. This system provides us with easier management of data collection than our previously employed systems by means of autonomous system recovery, periodical state monitoring, and dynamic warning procedures. Operation of the WONM system is introduced in this report