17 October 2023 in IEEE Transactions on Instrumentation and Measurement
Accurately measuring weak electric currents in the order of mA in a non-invasive manner is crucial yet challenging for industrial electronics. In this work, we first fabricated low-noise magnetic field sensor chips based on the tunneling magnetoresistive (TMR) effect. A composite free layer and a three-step annealing process were used to improve performance, resulting in a sensitivity of 30 V/V/T (3 mV/V/Oe), non-linearity below 0.5%, and reduce the noise density from 1.4 μV/V/√Hz to 0.7 μV/V/√Hz at 1 Hz, in comparison with the traditional two-step annealing process. We then developed a weak-current sensing module with a differential design using two TMR sensor chips arranged antiparallelly. Equipped with a magnetic flux concentration structure and a low-noise signal processing circuit, we demonstrated transient measurement of weak current well below 1 mA with a wide bandwidth of DC-16 kHz, a dynamic range of ±150 mA (51 dB), and a rapid response time of ~30 μs. The limit-of-detection (LoD) of the sensing module for DC and AC current reached 800 μA and 300 μA (RMS), respectively, which is about 30% lower than the single-chip design. This weak-current sensor based on differential TMR has the potential to be useful for industrial applications in smart grids and green energy.
4 September 2017 in Applied Physics Letters
The voltage modulation in spin dynamics via the spin-lattice coupling (SLC) effect has been investigated in epitaxial La0.5Sr0.5MnO3/PMN-PT multiferroic heterostructures. The critical angle for the disappearance of the first exchange (FEX) spin wave has been observed around 67° experimentally and been shifted about 4° by applying an electric field (E-field). In particular, at the critical angle, the FEX spin wave can be switched “on” and “off” by voltages, showing great potential in realizing magnonic devices. Moreover, the FEX spin wave resonance shift of 187 Oe at 173 K has been realized by the voltage driven SLC effect, which is a little larger than piezostrain-induced ferromagnetic resonance shift of 169 Oe. The experimental results can be well-explained by the modified Puszkarski spin wave theory.
28 April 2025 in IEEE Transactions on Power Electronics
In highly integrated switching circuits and power electronic converters, noncontact wideband current sensors are typically required for monitoring operational status. However, the magnetic field distribution of printed circuit board traces is influenced by the skin effect as the current frequency increases, which, in turn, affects the frequency characteristics of the sensor. In this study, we propose a dual-parallel current trace structure, which, through simulation analysis and experimental verification, utilizes the characteristics of the skin effect to enhance the equivalent magnetic induction detectable by the tunneling magnetoresistance (TMR) current sensor near 1 MHz, thereby improving its frequency response. Compared to traditional single-path current trace, the dual-parallel current trace structure demonstrates superior performance in terms of frequency bandwidth, current sensitivity, and resolution. Based on this novel current trace structure, we design and demonstrate a wideband TMR current sensor with a frequency range of dc-1.5 MHz, which provides a 50% improvement in bandwidth compared to traditional TMR sensor with single-path current trace. Furthermore, the sensor exhibits a full-scale error of no more than 0.4% within the 2.9 A rms range, a minimum resolution close to 5.4 mA, and excellent waveform tracking capability.
13 May 2022 in IEEE Transactions on Instrumentation and Measurement
The high sensitivity and MEMS-compatible process of tunneling magnetoresistance (TMR) sensors provide great opportunities to develop high-resolution magnetic field detection and imaging systems. In this work, we designed a magnetic field imaging (MFI) system based on TMR sensors to detect uniaxial magnetic field components of banknotes including U.S. dollars (USD) and Chinese Yuan (CNY), which clearly reveals the distribution of magnetic anti-counterfeiting markers inside the banknotes. Measurement results of the USD show that the magnetic ink signal is around $\mu \text{T}$ level, and the person portraits on banknotes can be revealed by sensor signals. The testing results of CNY banknotes indicate magnetic color-shifting ink images, as well as a clear magnetic anti-counterfeiting thread. Different from the traditional optical detection, magnetic detection provides unique signals and identification methods. With a satisfactory recognition rate, the proposed MFI system based on TMR sensors demonstrates its promising potential forgery detection and denomination identification of banknotes.
4 August 2021 in Science China Materials
Exchange bias between ferromagnetic and antiferromagnetic layers has been widely utilized in spintronic devices. Controlling the exchange bias in magnetic multilayers by an electric field (E-field) has been proposed as a low-power solution for manipulating the macroscopic properties such as exchange bias fields and magnetization values, while how the magnetic domains respond to the E-fields has rarely been reported in an exchange-biased system. Here, we realize the vector imaging of reversible electrical modulation of magnetization reversal in exchange-biased CoFeB/IrMn/PMN-PT (011) multiferroic heterostructures, utilizing in-situ quantitative magneto-optical Kerr effect (MOKE) microscopy. Under the electrical control, magnetic domains at −80 Oe rotate reversibly between around 160° and 80°–120°, whose transverse components reverse from 225° to 45° correspondingly. Moreover, pixel-by-pixel comparisons are conducted to further imply the reversible magnetization reversal by E-fields. E-field-induced reversible magnetization reversal is also demonstrated without applying external magnetic fields. Vector imaging of electrical manipulation of exchange bias is of great significance in understanding the magnetoelectric effect and the development of next-generation spintronic devices.
3 November 2025 in IEEE Transactions on Power Electronics
Tunneling magnetoresistance (TMR) current sensors have been studied extensively in recent years due to their advantages of high sensitivity and low power consumption. However, temperature drift remains a critical factor limiting their detection accuracy and stability. Here, we propose a digital-analog hybrid compensation scheme for temperature drift suppression and demonstrate a high-precision TMR current sensor prototype. Experimental verification shows that after compensation, the sensor achieves a sensitivity temperature drift of 17.18 ppm/°C and a zero-point temperature drift of 9.86 ppm/°C within the temperature range of −40°C to +80°C. Simultaneously, the TMR sensor features a working bandwidth of dc-80 kHz, with a full-scale error not exceeding 0.5%FS within the measurement range of ±10 Ap, a minimum resolution of 2 mA, and a dynamic range as high as 80 dB. The proposed digital-analog hybrid compensation method provides an important guidance for the design and application of TMR sensors with suppressed temperature drift.