24 June 2011 in Vehicle System Dynamics
Suspension components play key roles in the running behaviour of rail vehicles, and therefore, mathematical models of suspension components are essential ingredients of railway vehicle multi-body models. The aims of this paper are to review existing models for railway vehicle suspension components and their use for railway vehicle dynamics multi-body simulations, to describe how model parameters can be defined and to discuss the required level of detail of component models in view of the accuracy expected from the overall simulation model. This paper also addresses track models in use for railway vehicle dynamics simulations, recognising their relevance as an indispensable component of the system simulation model. Finally, this paper reviews methods presently in use for the checking and validation of the simulation model.
1 January 1999 in Vehicle System Dynamics
In the simulations of rail vehicle dynamic behaviour, the computation of wheel-rail forces is repeated many times. Therefore a short calculation time is very important. A fast algorithm and computer code for the computation of wheel-rail forces under known contact geometry and creep and spin conditions is presented in the paper. The proposed method assumes ellipsoidal contact area and normal stress distribution according to Hertz. Because of the short calculation time it can be used instead of simple formulas to improve the accuracy or as a substitution of Kalker's programme FASTSIM to save the computation time. The method has been tested and used in different simulation tools with very good experience. The computer code and some test results given in the appendix allow to apply this method in the user's own computer simulation programmes.
13 August 2013 in Vehicle System Dynamics
The evaluation of creep forces is a complex task and their calculation is a time-consuming process for multibody simulation (MBS). A methodology of creep forces modelling at large traction creepages has been proposed by Polach [Creep forces in simulations of traction vehicles running on adhesion limit. Wear. 2005;258:992–1000; Influence of locomotive tractive effort on the forces between wheel and rail. Veh Syst Dyn. 2001(Suppl);35:7–22] adapting his previously published algorithm [Polach O. A fast wheel–rail forces calculation computer code. Veh Syst Dyn. 1999(Suppl);33:728–739]. The most common method for creep force modelling used by software packages for MBS of running dynamics is the Fastsim algorithm by Kalker [A fast algorithm for the simplified theory of rolling contact. Veh Syst Dyn. 1982;11:1–13]. However, the Fastsim code has some limitations which do not allow modelling the creep force – creep characteristic in agreement with measurements for locomotives and other high-power traction vehicles, mainly for large traction creep at low-adhesion conditions. This paper describes a newly developed methodology based on a variable contact flexibility increasing with the ratio of the slip area to the area of adhesion. This variable contact flexibility is introduced in a modification of Kalker's code Fastsim by replacing the constant Kalker's reduction factor, widely used in MBS, by a variable reduction factor together with a slip-velocity-dependent friction coefficient decreasing with increasing global creepage. The proposed methodology is presented in this work and compared with measurements for different locomotives. The modification allows use of the well recognised Fastsim code for simulation of creep forces at large creepages in agreement with measurements without modifying the proven modelling methodology at small creepages.
1 January 2006 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Stability assessment of rail vehicles is probably the most widespread form of dynamic analysis in railway vehicle engineering. The computer simulations using fully non-linear three-dimensional vehicle models constructed in a modern multi-body simulation tool allow detailed non-linear stability analysis for the specified conditions. However, high sensitivity to the wheel/ rail contact conditions and different definitions of stability in mechanics and in railway practise can lead to significant differences between prediction and the measurement. Different methods of non-linear stability analysis, which may be used in industrial applications, are introduced and compared on selected examples of contact geometry wheel set/track with high equivalent conicity. The comparisons show that the linearization of the contact geometry wheel set/track can enable a better assessment of the non-linear stability analyses. A decreasing equivalent conicity function in the range of amplitudes below ∼ 3 mm leads to supercritical Hopf bifurcation with small limit cycles and consequently to largest differences between the methods compared. When excluding the contact geometries leading to supercritical Hopf bifurcation, the results achieved are closer each other, but still with differences in the range of up to 10 per cent. This uncertainty in the stability prediction caused by the method applied must be taken into consideration, in addition to other uncertainties related to vehicle parameters, modelling, etc.
28 June 2021 in Vehicle System Dynamics
This paper surveys advances in the understanding and modelling of wheel–rail creep forces. The main focus is placed on tribological aspects, for which significant progress was made in the past two decades. We emphasise the role played by the surface conditions, i.e. the presence of liquid and solid layers, surface roughness, and near-surface plastic deformation. As these surface conditions may change over time, transient changes may be obtained in the creep force characteristic. This brings feedback into the picture, with consequences and opportunities for optimised adhesion recovery, traction control, and braking systems.