9 March 2009 in Applied Optics
In this paper, a design method for a multiwavelength photon sieve is described based on a random-area-divided approach, where the whole aperture of a multiwavelength imaging photon sieve is divided into multiple discrete spaces corresponding to the number of the selected working wavelengths. The micropinhole distribution in each discrete space can be calculated for the defined wavelength with one fixed focal length in terms of the normal design for photon sieve. A three-wavelength photon sieve was designed and fabricated in the lab, and its imaging properties are analyzed in the experimental optical system with satisfactory results.
21 February 2018 in DEStech Transactions on Engineering and Technology Research
Square-Aperture Microlens Array Fabrication by the Moving Mask Technology
25 February 2020 in Physica Scripta
Layers of microlens array (MLA) and micropattern array (MPA) are integrated on a layer of polyester film, with the aim to give rise to a special dynamic pattern which can be observed without any visual facilities. In this paper, we propose an improved approach for obtaining a presentation of an individual dynamic moiré pattern rather than dynamic moiré patterns in an array. The improved dynamic moiré pattern can be amplified without size limitation and has different dynamic effects from the traditional dynamic moiré pattern, as it will appear and disappear with variation of the viewing angle. The principle of designing every elemental unit of the MPA is described. The differences between the improved method and the traditional method are compared, and how the improved dynamic moiré pattern works is explained in detail. The formulae describing the relationship between parameters of the improved dynamic moiré pattern and its microstructure are derived. In addition, relative experiments are conducted, and an improved dynamic moiré pattern of the expected size are achieved and validated. This microstructural device on film has potential applications in document security, packaging, and authentication.
16 February 2018 in DEStech Transactions on Economics, Business and Management
31 March 2021 in Optics Express
Together, the number of waves, wave vectors, amplitudes, and additional phases constitute the coherent wave group configuration and determine the pattern of the interference field. Identifying an appropriate wave group configuration is key to generating vortex lattices via interferometry. Previous studies have approached this task by first assigning the four elements, then calibrating the vortex state of the interference field. However, this method has failed to progress beyond generating third-order vortex lattices, which are insufficient for some practical applications. Therefore, this study proposes a method for determining the proper wave group configurations corresponding to arbitrary-order vortex lattices. We adopt a goal-driven approach: First, we set a vortex lattice as the target field and model it, before decomposing the target field into a sum of multiple harmonics using Fourier transforms. These harmonics constitute the wave group required to generate the target vortex lattice. As vortex lattices of any order can be set as the target field, the proposed method is compatible with any mode order. Simulations and experiments were conducted for fourth- and fifth-order vortex lattices, thus demonstrating the effectiveness of the proposed method.