The miniaturized and integrated microlens array (MLA) can effectively achieve the beam homogenization, compactness and miniaturization of laser systems. When the high-coherence laser beam is homogenized by means of using the MLA, interference fringes will occur in the homogenized light spot due to the periodicity of the MLA, which seriously affects the uniformity of the homogenized light spot. To solve this problem, a novel random microlens array (rMLA) structure was proposed for the purpose of achieving beam homogenization. The coherence in the homogenization process is suppressed by means of breaking the periodicity of the MLA. The homogenized light spot with a high energy utilization is then obtained accordingly. In the fabrication process, a clever method of combining chemical etching with lithography technology is performed to fabricate a honeycomb rMLA and a rectangular rMLA. The experimental results show that the energy utilization rate of the two types of the rMLAs is about 90%, and the uniformity of the homogenized light spots generated by the honeycomb rMLA and the rectangular rMLA are more than 80% and 85%, respectively. Meanwhile, fully cost-effective fabrication is possible to be realized.

In this paper, a design method for a multiwavelength photon sieve is described based on a random-area-divided approach, where the whole aperture of a multiwavelength imaging photon sieve is divided into multiple discrete spaces corresponding to the number of the selected working wavelengths. The micropinhole distribution in each discrete space can be calculated for the defined wavelength with one fixed focal length in terms of the normal design for photon sieve. A three-wavelength photon sieve was designed and fabricated in the lab, and its imaging properties are analyzed in the experimental optical system with satisfactory results.

An economical method for fabricating spiral phase plate (SPP) with continuous surface is proposed in this paper. We use an interval to quantize a three dimensional surface of an SPP into two dimensional bars to form a binary mask. The exposure dose can be precisely distributed through this mask in the exposure process. We discuss the select criterion of the quantization interval and the fabricating processes of SPP in detail. In the results, we present the fabrication of four kinds of high quality SPPs with different topological charges. The morphology analysis and the corresponding optical measurements verify the reliability of our fabrication method.

We have recently shown that spiral phase plates (SPPs) with continuous surface can be fabricated with one time exposing process only [35]. Four categories of SPPs with different topological charges at wavelength of 532 nm were prepared, and the corresponding vortex beams were obtained. In this paper, in order to verify the optical effects' quality of the SPPs, the optical characteristics, including the diffractive and interferential characteristics, were systematically analyzed in the Fresnel diffraction region. In addition, the optical characteristics have been used to describe the surface profile of the SPPs. The results show that the SPPs have good surface quality and excellent optical effects. Compared with the other generation methods for vortex beam, this method is particularly suitable for obtaining a vortex beam with high efficiency and continuous phase and is extremely promoting R&D of the corresponding applications.

We report here the development of a compact, open-path CO₂ and H₂O sensor based on the newly introduced scanned-wavelength modulation spectroscopy with the first harmonic phase angle (scanned-WMS-θ1f) method for high-sensitivity, high temporal resolution, ground-based measurements. The considerable advantage of the sensor, compared with existing commercial ones, lies in its fast response of 500 Hz that makes this instrument ideal for resolving details of high-frequency turbulent motion in exceptionally dynamic coastal regions. The good agreement with a commercial nondispersive infrared analyzer supports the utility and accuracy of the sensor. Allan variance analysis shows that the concentration measurement sensitivities can reach 62 ppb CO₂ in 0.06 s and 0.89 ppm H₂O vapor in 0.26 s averaging time. Autonomous field operation for 15-day continuous measurements of greenhouse gases (CO₂/H₂O) was performed on a shore-based monitoring tower in Daya Bay, demonstrating the sensor’s long-term performance. The capability for high-quality fast turbulent atmospheric gas observations allow the potential for better characterization of oceanographic processes.

The artificial compound eye (ACE) structure is a new type of miniaturized, lightweight and intelligent imaging system. This paper has proposed to design a multi-spectral ACE structure to enable the structure to achieve multi-spectral information on the basis of imaging. The sub-eyes in the compound eye structure have been designed as diffractive beam splitting lenses with the same focal length of 20 mm, but with the different designed center wavelengths of 650 nm, 532 nm, and 445 nm, respectively. The proximity exposure lithography and reactive ion etching process were used to prepare the designed multi-spectral ACE structure, and the spectral splitting and multi-spectral imaging experiments were carried out to verify the multi-spectral imaging function of the structure without axial movement. Furthermore, the structure can be designed according to actual requirements, which can be applied to covert reconnaissance, camouflage identification, gas leakage or other fields.