Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
Auto-generated profile, based on publicly available information
Masatou Ishihara
Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
Recent studies have revealed that van der Waals (vdW) heteroepitaxial growth of 2D materials on crystalline substrates, such as hexagonal boron nitride (hBN), leads to the formation of self-aligned grains, which results in defect-free stitching between the grains. However, how the weak vdW interaction causes a strong limitation on the crystal orientation of grains is still not understood yet. In this work, we have focused on investigating the microscopic mechanism of the self-alignment of MoS2 grains in vdW epitaxial growth on hBN. Using the density functional theory and the Lennard–Jones potential, we found that the interlayer energy between MoS2 and hBN strongly depends on the size and crystal orientation of MoS2. We also found that, when the size of MoS2 is several tens of nanometers, the rotational energy barrier can exceed ∼1 eV, which should suppress rotation to align the crystal orientation of MoS2 even at the growth temperature.
4 December 2023 in ACS Applied Materials & Interfaces
Biofilms are the result of bacterial activity. When the number of bacteria (attached to materials’ surfaces) reaches a certain threshold value, then the bacteria simultaneously excrete organic polymers (EPS: extracellular polymeric substances). These sticky polymers encase and protect the bacteria. They are called biofilms and contain about 80% water. Other components of biofilm include polymeric carbon compounds such as polysaccharides and bacteria. It is well-known that biofilms cause various medical and hygiene problems. Therefore, it is important to have a sensor that can detect biofilms to solve such problems. Graphene is a single-atom-thick sheet in which carbon atoms are connected in a hexagonal shape like a honeycomb. Carbon compounds generally bond easily to graphene. Therefore, it is highly possible that graphene could serve as a sensor to monitor biofilm formation and growth. In our previous study, monolayer graphene was prepared on a glass substrate by the chemical vapor deposition (CVD) method. Its biofilm forming ability was compared with that of graphite. As a result, the CVD graphene film had the higher sensitivity for biofilm formation. However, the monolayer graphene has a mechanical disadvantage when used as a biofilm sensor. Therefore, for this new research project, we prepared bilayer graphene with high mechanical strength by using the CVD process on copper substrates. For these specimens, we measured the capacitance component of the specimens’ impedance. In addition, we have included a discussion about the possibility of applying them as future sensors for monitoring biofilm formation and growth.