17 November 2023 in Chemical Engineering Journal
25 February 2025 in Carbon
18 January 2025 in Additive Manufacturing
24 January 2025 in Journal of Materials Chemistry C
The development of multi-band compatible absorbing materials is crucial for protecting against complex and dynamic electromagnetic environments in the future. However, traditional coating-based approaches have limitations in achieving cross-frequency band absorption. In this study, a graphene-based absorber was prepared using a simplified thermal reduction method, and a flexible liquid crystal elastomer (LCE) was used as the resin matrix. By employing digital light processing (DLP) printing technology, a double-layer honeycomb structure absorber was designed and fabricated, demonstrating compatibility for absorption in both microwave and terahertz frequency bands. With a total thickness of 2 mm, the absorber achieved a minimum reflection loss (RLmin) of −59.2 dB and an effective absorption bandwidth (EAB) of 4.53 GHz within the microwave frequency range (2–18 GHz). In the terahertz frequency range (0.3–1.2 THz), RL was below −35 dB, with an average absorption rate of 99.95%. These results highlight the potential of the integrated material-structure-function approach in developing cross-frequency band absorbers, providing a promising solution for future multi-frequency electromagnetic pollution.
20 August 2025 in Journal of Materials Chemistry C
Electromagnetic (EM) pollution has emerged as a pressing concern, driving the demand for high-performance microwave absorbing materials.
18 February 2026 in SSRN Electronic Journal
The challenges of laser additive manufacturing of copper are mainly due to the high thermal conductivity, high laser reflectivity and high melting temperature of copper. Although the vat photopolymerization additive manufacturing that disperses powder in photosensitive resin has garnered recent attention, the sedimentation of particles and the attenuation of ultraviolet light are still unresolved issues. In this study, a digital light processing (DLP) 3D printing method based on in-situ Cu2+ solution systems was proposed for the first time to construct complex three-dimensional copper microstructures. Our strategy is based on the ionic solution system as the core for the preparation of Cu2+-loaded photosensitive resin. The photoresin was patterned using DLP technology to create a Cu2+-loaded photoresin framework (Cu2+-LPF). A three-step heat treatment process subsequently achieved micro-copper structures with uniform shrinkage of 74.8%, dense surfaces and minimal internal defects. The microstructures achieve a minimum feature size of 35 μm, a resistivity of only 4.34 μΩ·cm. Nanoindentation characterization revealed exceptional hardness values of 2.04 ± 0.54 GPa. The microstructures are rich in twins and have excellent hardness and electrical conductivity. This work establishes an efficient route for fabricating complex three-dimensional copper microarchitectures and opens new opportunities for applications in microfabrication, sensing, and metamaterials.