Solvent polarity and crosslinking density govern lyogel swelling and molecular dynamics revealed by NMR relaxometry. High-polarity solvent forms macroporous and slow solvent exchange, while low-polarity solvent induces shrinkage and faster exchange.
Triply Periodic Minimal Surface (TPMS) structures have emerged as a new class of porous materials with variable geometries and favourable transport properties, making them promising for reactor internals in chemical engineering. However, experimental data on internal TPMS flow behaviour are still limited. To address this gap, the flow behaviour in additively manufactured TPMS structures is analysed using three-dimensional Magnetic Resonance Imaging (MRI) velocimetry in a large-bore vertical 3 T MRI system, in cylindrical columns of 38 mm diameter and Reynolds numbers between 50 and 300. Three different TPMS geometries are investigated, and consistency between Computational Fluid Dynamics (CFD) simulations and experimentally measured MRI velocity fields is established through cross-validation. The MRI system provides fully three-dimensional velocity fields with a divergence deviation below 6 %. MRI revealed distinct flow features: the Gyroid TPnS exhibited pronounced channelling, while the Schwarz-Diamond TPSf showed merge-split behaviour, achieving a 46 % increase in lateral mixing compared to the Gyroid TPnS structures. Numerical simulations reproduce the flow features and show agreement with the MRI data. The combined methodology demonstrates the suitability of MRI velocimetry for the experimental validation of CFD simulations and establishes a robust foundation for future studies of heat and mass transfer, as well as reactive flow, in structured reactor systems.
Scale-up of structured reactors strongly influences transport phenomena, yet it remains unclear whether topology-controlled hydrodynamic mechanisms stay dynamically similar across scales. Here, hydrodynamic scale-up in Gyroid-based triply periodic endo-skeleton surface (TPnS) reactors was investigated using Magnetic Resonance Imaging (MRI) and Computational Fluid Dynamics (CFD) in geometries with inner diameters of 38 mm (DN 40) and 100 mm (DN 100), operated at matched hydraulic Reynolds numbers. Scale-up was achieved by increasing reactor diameter while preserving Gyroid unit-cell size and porosity, isolating reactor-scale effects at identical channel-scale geometry. A large-bore vertical 3 T MRI system with custom-built radiofrequency receive arrays enabled non-invasive three-dimensional velocimetry inside opaque structured reactors not only at DN 40 but also at DN 100, to the authors' knowledge the first such measurement at this scale. Velocity fields were validated against theory, mass flow measurements, and CFD. The measurements show that transport enhancement in Gyroid TPnS structures is governed by topology-controlled inertial flow dynamics: interconnected channels generate localized high-velocity pathways, transverse momentum redistribution, and stable counter-rotating secondary-flow structures. Increasing Reynolds number strengthens these vortical motions and enhances transverse transport while preserving the dominant flow topology. These mechanisms are retained during scale-up from DN 40 to DN 100, whereas the relative mean-median difference of the axial velocity remains consistently lower in DN 100 (0.01-0.10) than in DN 40 (0.14-0.27), indicating a more symmetric axial-velocity distribution in the larger reactor. The MRI-CFD methodology provides an experimentally validated framework for investigating transport in structured reactors at industrially relevant scales.