23 March 2023 in Nature Materials
27 June 2022 in Applied Physics Letters
Dual-band photodetectors have attracted intensive attention because of the requirement of multiband information [such as visible (VIS) and near-infrared (NIR)] in multicolor imaging technology, in which additional information beyond human vision could assist object identification and navigations. The use of 2D materials can break the limitation of high cost of conventional epitaxial semiconductors and a complex cryogenic cooling system for multi-band detection, but there is still much room to improve the performance, especially in responsivity and signal noise ratio. Herein, we have fabricated a VIS-NIR dual-band photodetector based on a multilayer Ta2NiSe5/GaSe heterojunction. Benefiting from the type-II heterojunction, the separation of photo-induced carriers is naturally enhanced, which promotes the responsivity of this dual-band photodetector to 4.8 A W−1 (VIS) and 0.15 A W−1 (NIR) at room temperature with a suppressed dark current at ∼4 pA. Our work suggests that the Ta2NiSe5/GaSe heterostructure is a promising candidate for ultrasensitive VIS-NIR dual-band photodetection.
6 June 2023 in IEEE Sensors Journal
In this work, a dual-band junction field effect phototransistor (JFEPT) was fabricated by integrating p-type BP with Si doped β-Ga 2 O 3 . The operation principle of the JFEPT was systematically investigated by commercial TACD software SILVACO. The results indicate that the photocurrent mainly formed by electrons under short wave radiation, while it is composed of electrons and holes under long wave irradiation. In addition, the Ga 2 O 3 doping concentration was determined to be 3×10 16 cm -3 to obtain a large photo-to-dark current ratio ( PDCR ). The threshold voltage ( V th ) of the fabrication JFEPT was 0.65 V, indicating that the device working in normally-off state. The drain current was ~ 10 -6 mA/mm and the on/off ratio is 10 5 at V G = - 4 V and V DS = 5 V. And the device exhibits low leakage current of 2.84×10 -6 mA/mm. Under 254 nm and 808 nm illumination, the PDCR were 14713.79 and 5.53, and the responsivity were calculated to be 2.39×10 6 mA/W and 535 mA/W, respectively. What’s more, a low noise current of 0.17 nA/Hz 1/2 at 1 Hz is beneficial for the device to detect the ultra-weak optical signal. This work provides an important reference for the realization of high-performance UV-IR dual-band detector.
1 April 2021 in APL Materials
As an essential member of group-V layered materials, gray arsenic (g-As) has recently begun to draw researchers’ attention due to fantastic physical properties predicted by theoretical calculation. However, g-As presents semimetal behavior as the thickness exceeds bilayers, which hinders its further device applications, such as in logic electronics. Herein, we report the growth of high quality gray arsenic–phosphorus–tin (g-AsPSn) alloys via a simple one-step chemical vapor transport process. The as-grown g-AsPSn alloy remains the same layered rhombohedral structure as g-As, while the g-AsPSn alloy shows an opened bandgap compared with g-As. Infrared absorption and photoluminescence spectra reveal a narrow optical bandgap of 0.2 eV. A field effect transistor based on few-layer g-AsPSn alloy flakes shows a typical p-type semiconductor behavior and a relatively high mobility of ∼66 cm2 V−1 S−1 under ambient conditions. It can be envisioned that the synthesized two-dimensional layered narrow-gap g-AsPSn alloy presents considerable potential applications in electronics and infrared optoelectronics.
28 March 2022 in Applied Physics Letters
Infrared detection by binary phosphides is of great interest due to their high carrier mobility, excellent stability, and high absorbance coefficient, as they have a wide range of applications in civil and military fields. As the only metastable phase in gold phosphide, Au2P3 has attracted great attention in fundamental research and optoelectronic applications. Here, we synthesized high-quality and environmentally stable Au2P3 nanosheets through a modified facile one-step mineralization-assisted chemical vapor transport method. Through systematic infrared photoluminescence characterizations, it is found that the as-synthesized Au2P3 nanosheets display an impressive mid-infrared luminescence band centered at about 6.64 μm (0.187 eV) at room temperature. Furthermore, Au2P3-based self-powered photodetectors display outstanding infrared detection performance with D* = 2.9 × 1010 Jones at 1550 nm and D* = 1.9 × 108 Jones at 2611 nm, respectively. Our results suggest that the synthesized Au2P3 nanosheets could be promising candidates for future chip-based infrared nanophotonic and optoelectronic circuitry.
26 March 2025 in Research Square
Polarization-sensitive neuromorphic vision sensing excels in distinguishing light polarization states, offering intrinsic advantages in reducing glare and enhancing visual clarity in complex lighting environments, enabling advanced applications in autonomous driving, optical communication, and bioinspired imaging across the visible to infrared spectrum. Here, we present a polarization-sensitive neuromorphic phototransistor based on a high-quality, intrinsically anisotropic two-dimensional black arsenic-phosphorus (b-As0.2P0.8) nanosheets, which exhibits exceptional optoelectronic performances with a peak responsivity up to 2.88 A/W, a polarization ratio of 4.7 and a dynamic range of 40 dB within the near-infrared communication band. Through multidimensional input control, including polarization and gate voltage, the phototransistor successfully simulates synaptic behaviors analogous to human neural responses to visual stimuli, with paired-pulse facilitation (PPF) values reaching 201%. Critically, the device demonstrates gate-tunable short-term plasticity, with optical persistence triggering stable long-term plasticity states that underpin memory consolidation. The neuromorphic properties enable the development of a hybrid optical-electronic neural network (HOENN) which achieves a classification accuracy of over 90% on the Fashion-MNIST dataset and a reconstruction accuracy of 71.38% using data from the Yale Face Database under linear polarization at 0 degrees. We demonstrate a polarization-resolved imaging approach utilizing the b-As0.2P0.8 phototransistor to reconstruct hidden targets with high fidelity through Stokes parameter extraction and degree of linear polarization (DoLP) mapping, revealing intricate polarization features invisible to conventional imaging systems. Our work establishes a foundational platform for high-performance neuromorphic vision systems with integrated polarization imaging, polarization computation, and polarization communication functionalities, addressing critical challenges in scalable brain-inspired optoelectronic technologies.