20 February 2023 in Plasma Physics and Controlled Fusion
The MAST-U fusion plasma research device, an upgrade to the Mega Amp Spherical Tokamak, has recently completed its first campaign of physics operation. MAST-U operated with Ohmic, or one or two neutral beams for heating, at 400–800 kA plasma current, in conventional or ‘SuperX’ divertor configurations. Equilibrium reconstructions provide key plasma physics parameters vs. time for each discharge, and diagrams are produced which show where the prevalence of operation occurs as well as the limits in various operational spaces. When compared to stability limits, the operation of MAST-U so far has generally stayed out of the low q, low density instability region, and below the high density Greenwald limit, high beta global stability limit, and high elongation vertical stability limit. MAST-U still has the potential to reach higher elongation, which could benefit the plasma performance. Despite the majority of operations happening below established stability limits, disruptions do occur in the flat-top phase of MAST-U plasmas. The reasons for these disruptions are highlighted, and possible strategies to avoid them and to extend the operational space of MAST-U in future campaigns are discussed.
5 July 2016 in Nuclear Fusion
The magnetic perturbations produced by the resonant magnetic perturbation (RMP) coils will be rotated in ITER so that the spiral patterns due to strike point splitting which are locked to the RMP also rotate. This is to ensure even power deposition on the divertor plates. VMEC equilibria are calculated for different phases of the RMP rotation. It is demonstrated that the off harmonics rotate in the opposite direction to the main harmonic. This is an important topic for future research to control and optimize ITER appropriately. High confinement mode (H-mode) is favourable for the economics of a potential fusion power plant and its use is planned in ITER. However, the high pressure gradient at the edge of the plasma can trigger periodic eruptions called edge localized modes (ELMs). ELMs have the potential to shorten the life of the divertor in ITER (Loarte et al 2003 Plasma Phys. Control. Fusion 45 1549) and so methods for mitigating or suppressing ELMs in ITER will be important. Non-axisymmetric RMP coils will be installed in ITER for ELM control. Sampling theory is used to show that there will be significant a harmonic sideband. There are nine coils toroidally in ITER so . This results in a significant n = 6 component to the applied field and a significant n = 5 component to the applied field. Although the vacuum field has similar amplitudes of these harmonics the plasma response to the various harmonics dictates the final equilibrium. Magnetic perturbations with toroidal mode number n = 3 and n = 4 are applied to a 15 MA, burning ITER plasma. We use a three-dimensional ideal magnetohydrodynamic model (VMEC) to calculate ITER equilibria with applied RMPs and to determine growth rates of infinite n ballooning modes (COBRA). The case shows little change in ballooning mode growth rate as the RMP is rotated, however there is a change with rotation for the case.
4 November 2024 in Plasma Physics and Controlled Fusion
A linear magnetohydrodynamic (MHD) peeling–ballooning stability analysis of the edge-localized mode (ELM)-free phase of a MAST Upgrade (MAST-U) H-mode plasma is presented. In contrast to other similar discharges, #47018 is found to have a significantly higher and wider pedestal during its ELM-free H-mode phase that lasts for approximately 80 ms; this is made possible by the reduced core MHD mode activity on the q = 2 surface. During this period, there is sustained decoupling of peeling and ballooning branches of the stability boundary on J–α space, opening an access channel to the second stability regime with higher peaks in pedestal current density and pressure gradient (α). Such decoupling of the stability boundary has not previously been observed in MAST-U H-modes, and if such a condition can be readily reproduced, it opens a wide range of opportunities for MAST-U to explore low-collisionality peeling-limited pedestal regimes as well as advanced scenarios such as quiescent H-modes that are relevant to future reactors such as STEP and ITER.
8 May 2024 in Plasma Physics and Controlled Fusion
Achieving edge localized modes (ELMs) suppression in spherical tokamaks by applying resonant magnetic perturbations (RMPs) has proven challenging. The poloidal spectrum of the applied RMP is a key parameter that has an impact on the capability to mitigate and eventually suppress ELMs. In this work the resistive magnetohydrodynamic code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) is used to evaluate the possibility of directly measuring the plasma response in MAST-U, and particularly its variation as function of the applied poloidal spectrum, in order to guide the experimental validation of the predicted best RMP configuration for ELM suppression. Toroidal mode number n = 2 RMP is considered to minimize the presence of sidebands, and to avoid the deleterious core coupling of n = 1. Singular Value Decomposition is used to highlight linearly independent structures in the simulated magnetic 3D fields and how those structures can be measured at the wall where the magnetic sensors are located. Alternative ways to measure the multimodal plasma response and how they can be used to infer the best RMP configuration to achieve ELM suppression are also presented, including the plasma displacement and the 3D footprints at the divertor plates.
7 April 2026 in Nuclear Fusion
Plasmas with low collisionality and with the pedestal limited by peeling modes have been achieved in JET-ILW, MAST-U and TCV. The achieved electron-electron pedestal collisionality and the achieved ratio between electron separatrix density to pedestal density are in the ranges ν_e^(*ped)=0.1-0.4 and n_e^sep/n_e^ped=0.3-0.9, approaching ITER values. In these conditions, the experimental results show that the pedestal pressure increases with increasing density and no degradation of the pedestal pressure with increasing n_e^sep/n_e^ped has been observed. These behaviours are opposite to what observed in ballooning limited pedestals. However, in all the three machines, both the increase of the pedestal density and the increase of the separatrix density destabilize the ballooning modes and tend to move the pedestal from being peeling limited to being limited by coupled peeling –ballooning modes. The Europed pedestal predictions have been validated against the experimental results in all the three machines, showing a good qualitative agreement and a reasonable quantitative agreement when approaching ITER-relevant parameters of ν_e^(*ped) and ρ_ ^(*ped) (normalized ion Larmor radius). The Europed predictions have been applied to ITER showing that the instabilities that will limit its pedestal strongly depend on the values of n_e^ped and n_e^sep. Nonetheless, assuming type I ELMy H-modes, the ITER pedestal in the Q=10 scenario will reach p_e^ped≈60kPa, with a pedestal pressure that will increase with increasing density and with no degradation at high n_e^sep/n_e^ped.
1 September 2026 in Plasma Physics and Controlled Fusion
Three-dimensional magnetohydrodynamic (MHD) instabilities, including edge-localized modes (ELMs) and internal reconnection events (IREs), have been observed to precipitate loss of vertical stability in tokamak plasmas, resulting in vertical displacement events (VDEs). This vertical destabilization can occur due to toroidal current redistributions and/or shape changes resulting from these phenomena. Using a recently introduced method for rapidly reconstructing the two-dimensional toroidal plasma current density profile in real-time, results are presented that demonstrate the specific current distribution changes that occur during ELMs (on KSTAR) and IREs (on MAST-U) that lead to loss of vertical control. The method most efficiently reconstructs the toroidal current density profile by doing so on a basis of principal components of historical profiles. These principal components isolate dominant current profile dynamics, improving interpretability, increasing speed, and reducing dimensionality of the profile computation. On KSTAR, this computation is executed in the real-time plasma control system at a rate of 10 kHz (limited by available CPU cycle times), allowing the current profile evolution to be assessed at several times over the course of each ELM event. Further, by incorporating the reconstructions into a novel vertical stability metric, the contribution of specific current profile dynamics to the loss of vertical stability can be assessed in real-time for VDE avoidance and improved understanding of the causal relationship between three-dimensional MHD phenomena and VDEs. The success of this method in approximating toroidal current density profiles from kinetic equilibrium reconstructions is also presented ( ), along with its capability to produce other equilibrium quantities of interest in real-time at high time resolution.