Kun Chen

Kun Chen

Auto-generated profile, based on publicly available information

Kun Chen

Key Laboratory of Advanced Science and Technology on High Power Microwave, Northwest Institute of Nuclear Technology, Xian, China

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RXRenzhen Xiao
Renzhen Xiao
KCKun Chen
Kun Chen
YSYanchao Shi
Yanchao Shi
CCChanghua Chen
Changhua Chen
To further increase the beam-wave conversion efficiency, a super klystron-like relativistic backward wave oscillator (RBWO) with coaxial-premodulation (CPM) cavity is proposed. Compared with previous dual-premodulation (DPM) cavities, the CPM cavity intensifies the second and the third harmonic components, resulting in a larger fundamental harmonic current both in the slow-wave structure (SWS) and the extraction cavity, and, consequently, leads to an enhanced microwave power generation by the Cherenkov radiation and transition radiation. In the particle-in-cell simulation, an ${X}$ -band microwave with a power of 3.44 GW and record efficiency of up to 80% has been achieved.

15 February 2023 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
TMTian-Ze Miao
Tian-Ze Miao
RXRenzhen Xiao
Renzhen Xiao
YSYanchao Shi
Yanchao Shi
KCKun Chen
Kun Chen
YGYouyou Gui
Youyou Gui
JSJia-Ru Shi
Jia-Ru Shi
It is reported on the design and experiment of a dual-mode (TM 01 -TM 02 ) relativistic backward wave oscillator (RBWO) with a beam filtering ring (BFR) packaged with permanent magnet. The BFR makes use of the large transverse oscillation of electrons at low magnetic field. By absorbing part of the electron beam periodically, the amount of the electrons that would absorb power from the microwave in the slow-wave structure (SWS) is greatly reduced, so the beam-wave conversion efficiency is improved. Experimental results demonstrate that a 3.2 GW mixed-modes microwave at 9.87 GHz with an efficiency of 40% is obtained with a 675 kV, 11.8 kA beam guided by a 0.68 T magnetic field. The BFR has a considerable lifetime and can effectively improve the efficiency of the device with stable operation.

1 April 2022 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
RXRenzhen Xiao
Renzhen Xiao
KCKun Chen
Kun Chen
HWHuida Wang
Huida Wang
DWDongyang Wang
Dongyang Wang
YSYanchao Shi
Yanchao Shi
LGLei Gao
Lei Gao
Increasing the dimensions of high power microwave devices is an efficient method to improve the power capacity. However, an overmoded structure usually results in mode competition and a low beam-wave conversion efficiency. In this paper, a multi-mode operation mechanism is used to avoid mode competition and increase the efficiency. The calculation results of nonlinear theory of beam-multimode interaction show that the optimized conversion efficiency is up to 48% when TM01 mode, TM02 mode, and TM03 mode are all considered. As only the TM01 mode, TM02 mode, or TM03 mode is taken into account independently, the corresponding efficiency is 38%, 22%, or 20%. Based on this, a multi-mode relativistic backward wave oscillator is proposed with the ratio of the mean diameter of the slow wave structure (SWS) to the wavelength of the output microwave to be 3.5. The non-uniform SWS is used to increase the beam-wave conversion efficiency, and a combined reflector is adopted to reflect partial of the mixed microwave modes and make the device compact. The particle-in-cell simulations show that as the diode voltage is 1.1 MV, the beam current is 22.8 kA, and the external magnetic field is 0.76 T, the conversion efficiency is 45%, and the output microwave of 11.3 GW is the mixed modes of TM01 mode, TM02 mode, and TM03 modes with the corresponding power ratio of 74%, 7%, and 19%, respectively.

11 July 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KCKun Chen
Kun Chen
RXRenzhen Xiao
Renzhen Xiao
YSYanchao Shi
Yanchao Shi
TMTianze Miao
Tianze Miao
GZGuangshuai Zhang
Guangshuai Zhang
YYYihang Yang
Yihang Yang
In this article, the effect of microwave leakage into the diode region on the suppression of backward current in a relativistic backward wave oscillator (RBWO) operating at low magnetic field is investigated by the theoretical analysis, particle-in-cell (PIC) simulation, and experiments. The theoretical results show that some backward electrons are absorbed by the cathode holder due to microwave leakage, and as the microwave power increases, the microwave frequency increases, and the guiding magnetic field decreases, it will promote the absorption of electrons. The PIC simulations based on the first principle reveal that the leakage microwave partially suppresses the backward current and the suppression is enhanced when the incidence TM 02 is dominant. In the ${X}$ -band dual-mode RBWO packaged with permanent magnet experiments, a microwave pulse with the power of 3.9 GW, the frequency of 9.93 GHz, and the efficiency of 33% was measured when the diode voltage was 820 kV and diode current was 14.5 kA.

29 November 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
RXRenzhen Xiao
Renzhen Xiao
RCRenjie Cheng
Renjie Cheng
KCKun Chen
Kun Chen
JWJiaoyin Wang
Jiaoyin Wang
YSYanchao Shi
Yanchao Shi
We propose a novel cross-band high-power microwave (HPM) generator which is based on the relativistic magnetron (RM) with all cavity axial extraction and the radial three-cavity transit-time oscillator (TTO). A foil structure is used to isolate the output microwaves of the RM and the TTO. A regulating ring is introduced before the anode block of the RM to adjust the resonant frequency of the RM. A downstream endcap is added to collect the leakage current from the RM and delay the decrease in the output power. The particle-in-cell simulations show that as the diode voltage is 420 kV, the diode current is 11.4 kA, and the magnetic field is 0.22 T, an output power of 680 MW at the L-band from the RM and 1280 MW at the S-band from the TTO have been achieved, with a total beam–wave conversion efficiency of 41%. Moreover, the RM frequency ranges for about 10% by adjusting the position of the regulating ring, and the TTO frequency bandwidth is up to 68%, which covers the S-and C-band, by changing the cavity width of the radial TTO axially.

15 May 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
KCKun Chen
Kun Chen
RXRenzhen Xiao
Renzhen Xiao
YZyonggui zhai
yonggui zhai
YSYanchao Shi
Yanchao Shi
TMTianze Miao
Tianze Miao
RCRenjie Cheng
Renjie Cheng
The initial experimental results of asymmetric mode competition in an X -band dual-mode relativistic backward wave oscillator (RBWO) operating at the low magnetic field are presented. In the experiment, the use of receiving antennas with different polarization directions allows direct determination of asymmetric mode, and the asymmetric mode with a frequency of 10.27 GHz is excited, which is in good agreement with the particle-in-cell (PIC) simulation results. Judging from that, the competition mode is asymmetric EH $_{\text{21}}$ mode. The asymmetric mode competition mechanism in the device is investigated theoretically. It is shown that the drift length plays a key role in the suppression and excitation of the asymmetric mode, validated by the experiment and the PIC simulation.