In recent decades, direct solid sample analysis has been reported in the literature as an alternative to traditional methods of sample preparation, becoming well established in the atomic spectrometry field. Therefore, this review discusses recent advances in different techniques such as flame atomic absorption spectrometry, graphite furnace atomic absorption spectrometry, high-resolution continuum source graphite furnace atomic absorption spectrometry, electrothermal vaporization, laser ablation, laser-induced breakdown spectroscopy, X-ray fluorescence spectrometry, glow discharge optical emission and mass spectrometry and arc/spark optical emission spectrometry, which are the most commonly used techniques for solid sample analysis. New possibilities such as nonmetal detection through molecular emission or absorption signals, speciation analysis, portable instrumentation for in situ analysis, and surface elemental mapping for obtaining chemical imaging will be discussed. Aspects associated with advantages and limitations are presented, relating the main instrumental advances to the expansion of the methods developed in this subject, pointing out the potential ability to overcome spectral interference and matrix effects through the development of calibration strategies to achieve the success of solid sampling in several application areas.
Multi-energy calibration (MEC) was applied for the determination of As, Ba, Cd, Cr, and Pb in fertilizer samples by microwave-induced plasma optical emission spectrometry. Commercial fertilizer samples and a certified reference material of mineral fertilizer (CRM NIST 695) were digested using microwave-assisted acid. The MEC approach was carried out using only two calibration solutions: S1, composed of 50% v/v digested sample and 50% v/v standard reference solution containing the analytes, and S2, composed of 50% v/v sample and 50% v/v blank solution. The accuracy of the method was evaluated by analyzing CRM NIST 695, with recoveries in the 96–101% range. Addition and recovery experiments were also carried out for Cd determination, with recoveries between 92 and 105% for the evaluated samples. The MEC strategy was compared with traditional external standard calibration and standard additions methods and was the only one to provide accurate results for all evaluated analytes.
9 October 2019 in Journal of Analytical Atomic Spectrometry
Electronic waste (e-waste) is attracting increasing interest in industry, politics, academic centers, and initiatives worldwide. Because of its complex composition of precious and hazardous substances, new technologies are often required to process e-waste in order to maximize resource recovery and minimize possible harm to humans and the environment. Printed circuit boards (PCBs) are present in most electronic products and currently comprise a significant fraction of e-waste. In this study, a reference material (RM) for inorganic constituents in PCB samples was prepared and leaching procedures for its characterization were developed. Full factorial design and principal component analysis (PCA) were applied to evaluate five different types of acidic solvents (aqua regia, inverted aqua regia, aqua regia 50% v/v, 7 mol L−1 HNO3 + H2O2, and 14 mol L−1 HNO3) in sample leaching by microwave radiation and inductively coupled plasma optical emission spectrometry (ICP OES) for the determination of Ag, Al, As, Au, Ba, Cr, Cu, Fe, Ni, Pb, Sb, Si, Sn, and Zn. Diluted aqua regia provided high leaching efficiency and the best results for these elements. The optimal conditions for further experiments were fixed for 0.1 g of sample and 10 mL of acid mixture. The PCB material was also submitted to nondestructive testing by instrumental neutron activation analysis (INAA) and a paired t-test was applied to compare the results obtained by microwave radiation and INAA. A minimum mass study was carried out and 100 mg was established as the minimum sample mass for further studies in agreement with the optimal conditions fixed for the sample mass after optimization.
6 June 2017 in Journal of Agricultural and Food Chemistry