1 October 2020 in Journal of Environmental Chemical Engineering
16 July 2023 in Journal of Cleaner Production
RSRicardo Luís Radis Steinmetz
Ricardo Luís Radis Steinmetz
6 June 2025 in The Journal of Supercritical Fluids
22 May 2025 in ACS Sustainable Chemistry & Engineering
24 April 2026 in ACS Omega
The valorization of agro-industrial waste, such as cambuci fruit, is a sustainable strategy to mitigate environmental impacts and add economic value. The goal was to utilize the often-discarded cambuci peel, extract the bioactive compounds, and obtain high-value-added products. The extract was obtained by using a 70% ethanol solution in water. Given the sensitivity to the light and heat of the obtained extract, the supercritical-assisted atomization (SAA) technique was used for encapsulation, varying the extract to PVP ratios (1:2, 1:5, 1:10, and 1:15). The SAA system involved mixing liquid CO2 and the extract/PVP, followed by atomization in a precipitation chamber. The best results obtained in this study were achieved with an extract-to-PVP ratio of 1:15, which yielded the highest value (72%) and the highest levels of antioxidant capacity (142.83 μmol of Trolox/g of cambuci) and total phenolic compounds (69.94 mg of GAE/g of cambuci). Furthermore, the particles produced at this ratio had an average size of 1.17 μm with a relatively homogeneous size distribution. Moreover, after 5 months, the encapsulated cambuci exhibited better conservation of phenolic compounds and antioxidant activity compared with the cambuci extract stored under the same conditions. The use of Path2Green showed that this production process more closely adheres to green chemistry principles compared with two similar processes documented in the literature. These findings demonstrate that encapsulation with PVP, achieved through the SAA process, effectively preserves bioactive compounds and produces spherical, stable particles suitable for use in the nutraceutical and pharmaceutical industries, aligning with sustainability goals.
11 April 2026 in Industrial & Engineering Chemistry Research
The increasing generation of agro-industrial residues reinforces the importance of anaerobic digestion (AD) for renewable energy production and sustainable waste management. However, practical implementation remains limited by the lack of reliable predictive tools capable of estimating methane production prior to laboratory- or pilot-scale trials. Accurate methane prediction models are essential to support substrate selection, process optimization, cost reduction, and techno-economic assessment. Despite their relevance, existing theoretical models frequently show inconsistent performance when applied to complex or lignocellulosic feedstocks. Thus, this study systematically evaluated 13 mathematical models for predicting methane production from 10 agro-industrial residues, comparing theoretical estimates with experimentally determined biochemical methane potential (BMP) values under wet and dry AD conditions. Elementary and biochemical models performed poorly for lignocellulosic substrates and dry AD, with substantial deviations from the measured BMP values. Physicochemical approaches demonstrated greater reliability, particularly for pretreated substrates, where the McCarty model showed the closest agreement with the experimental data. Among the biodegradability correction factors tested, xBD No. 14 consistently improved the predictive accuracy. Overall, methane prediction performance was strongly influenced by substrate recalcitrance, pretreatment, and AD configuration, highlighting the need for more robust models for dry and lignocellulosic systems.