20 March 2019 in IEEE Transactions on Vehicular Technology
23 May 2016 in IEEE Transactions on Transportation Electrification
Modeling of lithium-ion cells is a key task in the development of a battery management system (BMS) to achieve battery pack safety and reliable operation. Electrochemical-based approaches enable modeling of internal electrochemical processes within the lithium-ion cell. Several reduced order electrochemical based modeling approaches amenable for online battery state estimation are reviewed in this paper. In particular, aging effects such as the solid-electrolyte-interface layer growth is modeled. The single-particle-model (SPM) method is extended using the following novelties: 1) numerical solution of the diffusion equation in the solid phase, 2) sensitivity on the numerical solution accuracy considering the number of shell partitions, 3) a new parameterization method that identifies pertinent parameters, 4) state-of-charge and state-of-health estimation algorithms based on hybrid SPM (HSPM), and 5) validations of SPM and HSPM based estimation algorithms using drive cycle data.
14 April 2019 in IEEE Transactions on Industry Applications
A semi-active hybrid energy storage system, consisting of a Li-ion battery pack, dc/dc converter, and Li-ion capacitor pack was developed for a range extended plug-in vehicle. The vehicle has a series-parallel drivetrain with two electric motors, a gas engine, gearbox, and a clutch to allow the engine to run decoupled from the gearbox in range extending mode. The peak dc electrical requirement of the electric drivetrain is about 175 kW, which is similar to the peak power capability of the developed hybrid energy storage system. A model of the prototype hybrid energy storage system, which has the Li-ion capacitor pack connected directly to the motor drive's dc bus and the battery pack connected to the Li-ion capacitor pack via a dc/dc converter, is developed and used to determine the optimal power split between the battery and Li-ion capacitor packs and for tuning the developed real-time control system. The real-time control system is shown through modeling and experimental testing of the full scale hybrid energy storage systems to reduce battery pack losses, increase vehicle range, and to have performance approaching that of the optimal control solution as calculated via dynamic programming.