Nagima A. Karabassova

Nagima A. Karabassova

Auto-generated profile, based on publicly available information

Nagima A. Karabassova

Atyrau University of Oil and Gas named after Safi Utebaev

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 August 2019 in SERIES CHEMISTRY AND TECHNOLOGY
Verified
Journal Article
Closed access
ABA.S. Bukanova
A.S. Bukanova
FKFazilat Kairliyeva
Fazilat Kairliyeva
LSL.B. Sakipova
L.B. Sakipova
NKN.A. Karabasova
N.A. Karabasova
SBSaule Bukanova
Saule Bukanova
RNR. N. Nasirov
R. N. Nasirov

30 October 2025 in Neft i Gaz
Verified
Journal Article
Closed access
AUATYRAU UNIVERSITY OF OIL AND GAS NAMED AFTER SAFI UTEBAEV
ATYRAU UNIVERSITY OF OIL AND GAS NAMED AFTER SAFI UTEBAEV
NKN.A. Karabassova
N.A. Karabassova
RKR.I. Khairudinov
R.I. Khairudinov
JRJSC "INSTITUTE OF PETROCHEMICAL REFINING"
JSC "INSTITUTE OF PETROCHEMICAL REFINING"
ABA.S. Bukanova
A.S. Bukanova
FKFazilat Kairliyeva
Fazilat Kairliyeva
The production of petroleum base oils at the global level is accompanied by constantly tightening quality requirements covering both technical and environmental aspects. The article addresses the need for lubricant production in Kazakhstan. Given the current level of environmental and consumer properties of petroleum products in the production of high-quality oils, there is a need to study hydrocatalytic processes for processing crude oil. A comparative characteristic of the dewaxing and catalytic hydrodewaxing processes in the processing of vacuum gas oil from the Atyrau oil refinery with the aim of obtaining high-quality oils is given. The dewaxing of vacuum gas oil produced oils with a viscosity index of 83-86 and a solidification temperature of minus 12 °C. The technology of catalytic hydrodepaffination allows us to produce high-quality special lubricating oils with a viscosity index of 136 and a solidification temperature of minus 21 °C. The conducted studies have demonstrated that this processing of residual hydro-carbon raw materials has a double advantage.: it not only provides excellent base oils, but also generates an additional volume of light fractions. This, in turn, contributes to the expansion of the range of petroleum products produced and a significant deepening of oil refining at the enterprise.

1 April 2026 in Kazakhstan journal for oil & gas industry
Verified
Journal Article
Open access
NKNagima A. Karabassova
Nagima A. Karabassova
FKFazilat Kairliyeva
Fazilat Kairliyeva
GSGulbarshin K. Shambilova
Gulbarshin K. Shambilova
RSRishat R. Shiriyazdanov
Rishat R. Shiriyazdanov
Background: Increasing the depth of oil refining and improving the quality of commercial petroleum products are directly related to the efficiency of primary processing, particularly atmospheric oil distillation. This problem is extremely relevant for the modern oil and gas industradoy, since primary crude oil processing units operating in Kazakhstan were constructed during the Soviet period and therefore require modernization. Aim: Development and experimental evaluation of technological methods for intensifying atmospheric and vacuum crude oil distillation at the ELOU-AVT unit of the Atyrau Refinery, aimed at reducing the content of light fractions in fuel oil and increasing the yield of valuable distillate products. Materials and methods: To study the fractional composition of fuel oil, the ARN laboratory setup was used. Data from analytical control of ELOU-AVT products and material balance calculations are presented. Diagrams illustrating the yield of light petroleum products were constructed to visualize the obtained results. Results: Based on laboratory research, it was found that the content of light petroleum products in fuel oil exceeded the norm. To increase the yield of vacuum gas oil, raise the coke residue of the tar, and reduce the output of fuel oil at the ELOU-AVT unit, technological measures were implemented to increase the supply of live steam to the bottom of the atmospheric column and reduce its consumption in the vacuum column. During the experimental and design phase, the content of light petroleum products in fuel oil was reduced from 7% to 5.5%. The coke residue of tar increased from 10.199% to 10.619%. An increase in the yield of gasoline, jet fuel, vacuum gas oil, and vacuum diesel fuel was recorded. Conclusion: The calculations and analysis carried out confirm the feasibility of investing in the development of a modernized autonomous oil platform that has improved ice resistance and meets all safety requirements for operation in the North Caspian Sea.

24 June 2025 in Kazakhstan journal for oil & gas industry
Verified
Journal Article
Open access
PDF file
NKN. А. Karabassova
N. А. Karabassova
FKFazilat Kairliyeva
Fazilat Kairliyeva
Background: The deep processing of hydrocarbon raw materials represents the most significant challenge in the oil refining. Nowadays, there are various technologies available worldwide to process heavy oil residues, which enhance the yield of light petroleum products. Among these, delayed coking is regarded as one of the most promising approaches. Aim: To investigate how the properties of processed raw materials affect the quantitative and qualitative indicators of coking products, we conducted tests using fuel oil samples from the Atyrau Oil Refinery, as well as flux and tar obtained through vacuum distillation followed by subsequent coking at the pilot unit. Materials and methods: A pilot delayed coking unit was employed for the systematic processing of heavy oil residues. Additionally, mathematical modelling and analysis of the experimental results have been performed to predict the behaviour and outcomes of the coking process under investigation. Results: The article presents the findings from studies conducted on the coking processes of fuel oil, flux and tar sourced from the Atyrau Oil Refinery. The volatile matter yield index for “crude” coke derived from tar decreases is observed to decrease to 7.1%, while for “crude” coke from fuel oil and flux are 7.8% and 7.4%, respectively. The ash content of coke obtained from tar is measured at 0.29%, whereas samples from fuel oil and flux yield ash contents of 0.23% and 0.26%. These measured values of ash content, volatile matter yield, and the mass fraction of silicon, iron, and vanadium for coke obtained from tar, meet the technical requirements for coke. Additionally, a mathematical prediction of the process was conducted, employing express determination to assess both qualitative and quantitative indicators of the resulting products. Conclusion: Based on experimental data of the delayed coking unit of Atyrau oil refinery, better quality coke was obtained at the processing of tar compared to the processing of fuel oil and flux. The proposed model can be used to predict the coking process by express-determination of qualitative and quantitative indicators of the obtained products. The developed model can be used for personnel training in the field of modelling technological processes, since it does not require in-depth knowledge of programming, which makes it suitable for the initial training of specialists.

30 April 2026 in Neft i Gaz
Verified
Journal Article
Closed access
ATA.V. Tuleusheva
A.V. Tuleusheva
ABAigul Bukanova
Aigul Bukanova
FKFazilat Kairliyeva
Fazilat Kairliyeva
NKN.A. Karabassova
N.A. Karabassova
SBSaule Bukanova
Saule Bukanova
In the context of the need to improve oil processing efficiency and ensure the stable operation of oil production facilities, the selection of effective demulsifiers is an important decision. The article presents the results of laboratory studies on the selection of a demulsifier for breaking water-oil emulsions of crude oil from the «Saltanat Balgimbayev» field. The efficiency of five demulsifiers was evaluated using the bottle test method under different dosages and temperature conditions. The highest efficiency was demonstrated by demulsifier №3: intensive water separation was observed at the initial stage of settling, and by the end of the experiment, the residual water content in the oil was 2,8%. For the other demulsifiers, the residual water content ranged from 6-7%, indicating the presence of a stable intermediate layer. The study of temperature effects showed the increasing the temperature from 10°С to 25°С had a more significant impact on phase separation dynamics than increasing the reagent dosage, reducing the residual water content from 5-16% to 2-4%. The obtained results justify the selection of the optimal demulsifier and temperature conditions for pilot-industrial tests, increasing equipment productivity and reducing energy consumption during processing. The study confirms the advisability of individual selection of demulsifiers for specific oil composition and production conditions.

30 December 2025 in Neft i Gaz
Verified
Journal Article
Closed access
NKN.A. Karabasova
N.A. Karabasova
AAA.I. Abilkhairov
A.I. Abilkhairov
DTD.K. Tolegenova
D.K. Tolegenova
DAD.G. Abdirakhmanova
D.G. Abdirakhmanova
In the context of the growing need to deepen oil refining, the efficient conversion of heavy petroleum residues is becoming particularly important, as it increases the yield of light fractions and reduces the production of low-profit furnace fuels. This article presents the results of laboratory studies on the visbreaking processing of bitumen from the Atyrau Oil Refinery. Data are provided on the characteristics of the initial residues, material balance, and quality of the process products at temperatures of 425 - 440 °C and a pressure of 0,8 MPa. It was found that increasing the temperature leads to a higher yield of gas and gasoline while simultaneously reducing the amount of residue. The process is accompanied by a decrease in sulfur content in gasoline fractions to 0,31–0,33% and in the residue to 0,38 – 0,41%, as well as a significant reduction in residue viscosity - from 360,2 to 43,7 – 83,7 cSt - which improves its commercial properties. The optimal process temperature was identified as 435 °C, providing a residue yield of 88,4%. The obtained results confirm the feasibility of incorporating visbreaking into the Atyrau Oil Refinery refining scheme alongside coking, which will enable processing of the entire volume of produced bitumen, reduce the consumption of diesel fractions used for dilution, increase the output of light products, and enhance the overall depth of oil refining. The studies demonstrate the high efficiency of visbreaking in improving the economic and technological performance of the refinery.