7 January 2022 in IEEE Transactions on Transportation Electrification
In this article, three new toothed biased flux permanent magnet (PM) motors are introduced and studied, each of which has a specific arrangement of excitation (dc field/PM) and flux path (series/parallel). This results in three main structures, namely, hybrid excited toothed slot-PM (HETSPM), toothed biased flux PM (TBFPM) with series flux path, and, finally, toothed biased flux slot PM (TBFSPM) with hybrid flux path. The TBFSPM structure has improved the average torque, torque ripple, and efficiency compared to other stator-PM motors. The HETSPM structure has improved the average torque per PM, and the TBFPM structure features a very low-torque ripple profile compared to other stator-PM motors. All the topologies have shown a good PM demagnetization resistance and lower PM loss compared to other structures. Moreover, a new Carter’s coefficient is introduced to increase the accuracy of harmonic analysis for split-tooth structures by modeling the nonlinear effect of fringing flux with a new transition function, which has increased the accuracy by 20% compared to the traditional approach. The theoretical analyses have been checked by the 2-D finite element method (FEM), and the TBFSPM structure is prototyped and tested to validate the simulation analyses.
30 January 2023 in IEEE Transactions on Energy Conversion
This paper proposes two biased flux permanent magnet (BFPM) motors in which the torque ripple issue of conventional doubly salient permanent magnet (DSPM) motor, as its predecessor, is greatly suppressed and the torque density of the BFPM structures has been improved. The permanent magnets (PMs) are positioned where they are easily accessible for an even better temperature management compared to other stator-PM structures. The second structure utilizes the available space between stator poles in which two sets of PMs are embedded between stator modules. This increases the torque density even more. The operation principles of these two structures are deeply discussed by identifying working harmonics of each flux source and then evaluated by the finite element method (FEM). An analytical procedure by deriving sizing equations of the structures is introduced and the effect of different design parameters on the electromagnetic performance is comprehensively studied. The performances of the structures are analysed by FEM. To better evaluate the superiority of the proposed structures, a demagnetization analysis is conducted and it is shown that even in high temperatures, the performance degradation of the proposed structures is much lower compared to other stator-PM structures. Finally, the proposed structures are prototyped to verify the simulation results.
30 August 2023 in IEEE Transactions on Transportation Electrification
This paper proposes an improved biased-flux motor in which the permanent magnets (PMs) are placed between the stator modules, therefore called intermodular PM (IMPM) motor. The proposed structure has increased the torque density while maintaining a low torque ripple. Moreover, due to the specific placement of PMs, the PMs are extensively protected from demagnetization. The operation principle of the proposed IMPM motor is thoroughly discussed using flux modulation theory and is comparatively analysed with other biased-flux structures. Based on this analysis, a new theoretical formulation is also drawn to calculate the power factor, which involves design related parameters. It has been studied that since the PMs are far from armature winding in the proposed structure, the PMs’ thermal stress is even less than other stator-PM structures. Due to this placement, the power factor of the proposed motor is drastically improved compared to other biased-flux motors. The no-load and full-load performances of the IMPM motor are studied using the finite element method (FEM). A comprehensive comparative study is also conducted to better locate the proposed structure in the biased-flux motors. Finally, a 6/11 IMPM motor is prototyped and tested to experimentally validate the theoretical and FEM analyses.