Bernhard Beuerle

Bernhard Beuerle

Auto-generated profile, based on publicly available information

Bernhard Beuerle

Division of Micro and Nanosystems, KTH Royal Institute of Technology, Stockholm, Sweden

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2018 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
BBBernhard Beuerle
Bernhard Beuerle
JCJames Campion
James Campion
USUmer Shah
Umer Shah
JOJoachim Oberhammer
Joachim Oberhammer
This letter reports for the first time on a very low loss silicon micromachined waveguide technology, implemented for the frequency band of 220–325 GHz. The waveguide is realized by utilizing a double H-plane split in a three-wafer stack. This ensures very low surface roughness, in particular on the top and bottom surfaces of the waveguide, without the use of any surface roughness reduction processing steps. This is superior to previous micromachined waveguide concepts, including E-plane and single H-plane split waveguides. The measured average surface roughness is 2.14 nm for the top/bottom of the waveguide, and 163.13 nm for the waveguide sidewalls. The measured insertion loss per unit length is 0.02–0.07 dB/mm for 220–325 GHz, with a gold layer thickness of 1 $\mu$m on the top/bottom and 0.3 $\mu$m on the sidewalls. This represents, in this frequency band, the lowest loss for any silicon micromachined waveguide published to date and is of the same order as the best metal waveguides.

25 September 2019 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
JCJames Campion
James Campion
YLYinggang Li
Yinggang Li
HZHerbert Zirath
Herbert Zirath
JOJoachim Oberhammer
Joachim Oberhammer
AHAhmed Hassona
Ahmed Hassona
TDTorbjorn S. Dahl
Torbjorn S. Dahl
A new integration concept for THz systems is presented, wherein patterned silicon-on-insulator wafers form all DC, IF and RF networks in a homogeneous medium, in contrast to existing solutions. Using this concept, silicon-micromachined waveguides are combined with silicon germanium (SiGe) microwave monolithic integrated circuits (MMICs) for the first time. All features of the integration platform lie in the waveguide's H-plane. Heterogeneous integration of SiGe chips is achieved using a novel in-line H-plane transition. As an initial step towards complete systems, we outline the design, fabrication and assembly of back-to-back transition structures, for use at D-band frequencies (110 – 170 GHz). Special focus is given to the industrial compatibility of all components, fabrication and assembly processes, with an eye on the future commercialisation of THz systems. Prototype devices are assembled via two distinct processes, one of which utilises semi-automated die-bonding tools. Positional and orientation tolerances for each process are quantified. An accuracy of ±3.5 μm, ±1.5 ° is achieved. Measured S-parameters for each device are presented. The insertion loss of a single-ended transition, largely due to MMIC substrate losses, is 4.2 – 5.5 dB, with a bandwidth of 25 GHz (135 – 160 GHz). Return loss is in excess of 5 dB. Measurements confirm the excellent repeatability of the fabrication and assembly processes and thus their suitability for use in high-volume applications. The proposed integration concept is highly scalable, permitting its usage far into the THz frequency spectrum. This work represents the first stage in the shift to highly-compact, low-cost, volume-manufacturable THz waveguide systems.

18 July 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
OGOleksandr Glubokov
Oleksandr Glubokov
XZXinghai Zhao
Xinghai Zhao
JCJames Campion
James Campion
BBBernhard Beuerle
Bernhard Beuerle
USUmer Shah
Umer Shah
JOJoachim Oberhammer
Joachim Oberhammer
This paper investigates the fabrication accuracy and repeatability of micromachined quadruplet filters designed at a center frequency of 270 GHz with a 5-GHz bandwidth using a versatile multilayer chip platform which allows for axially arranged waveguide ports. A large number of narrowband silicon-micromachined filters arranged on multiple chips are investigated for fabrication imperfections, assembly misalignment, and fabrication yield, employing fabrication-prediction and different chip-to-chip self-alignment feature strategies. A numerical technique for characterization of the entire fabrication process of the filters through extracting the error statistics for coupling coefficients of a large number of different samples from separately assembled chips is proposed. A total of 47 test filters in effectively 15 different design variants have been fabricated in two fabrication runs, evaluated, and analyzed. The most critical sources of errors are determined. The expected accuracy of the entire filters fabrication process is demonstrated through the yield analysis based on the collected error statistics.

1 June 2017
Verified
Conference Paper
Closed access
OGOleksandr Glubokov
Oleksandr Glubokov
XZXinghai Zhao
Xinghai Zhao
BBBernhard Beuerle
Bernhard Beuerle
JCJames Campion
James Campion
USUmer Shah
Umer Shah
JOJoachim Oberhammer
Joachim Oberhammer
In this paper, we present a microfabricated fourth-order sub-THz WR-3.4 bandpass waveguide filter based on TM110 dual-mode circular-shaped cavity resonators. The filter operates at the center frequency of 270 GHz with fractional bandwidth of 1.85% and two transmission zeros are introduced in the upper and in the lower stopband using a virtual negative coupling. The microchip filter is significantly more compact than any previous dual-mode designs at comparable frequencies, occupying less than 1.5 mm2. Furthermore, in contrast to any previous micromachined filter work, due to its axially arranged interfaces it can be directly inserted between two standard WR-3.4 rectangular-waveguide flanges, which vastly improves system integration as compared to previous micromachined filters; in particular no custom-made split-block design is required. The cavities are etched in the handle layer of a silicon-on-insulator (SOI) wafer, and coupling is realized through rectangular slots fabricated in the SOI device layer. Couplings of the degenerate modes in one cavity are facilitated by means of small perturbations in the circular cavity shapes. The measured average return loss in the passband is -18 dB and worst-case return loss is -15 dB, and an insertion loss of only 1.5 dB was measured. The excellent agreement between measured and simulated data is facilitated by fabrication accuracy, design robustness and micromachined self-alignment geometries.

1 October 2017
Verified
Conference Paper
Closed access
JSJan Svedin
Jan Svedin
RMRobert Malmqvist
Robert Malmqvist
BBBernhard Beuerle
Bernhard Beuerle
USUmer Shah
Umer Shah
JOJoachim Oberhammer
Joachim Oberhammer

1 November 2017
Verified
Conference Paper
Closed access
RMRobert Malmqvist
Robert Malmqvist
AGAndreas Gustafsson
Andreas Gustafsson
JSJan Svedin
Jan Svedin
BBBernhard Beuerle
Bernhard Beuerle
USUmer Shah
Umer Shah
JOJoachim Oberhammer
Joachim Oberhammer
A J-band (220-325 GHz) silicon micromachined waveguide power divider based on a tee-shape topology is presented. To characterise the power divider a test circuit was designed where one output path is connected using a low return loss multi-stepped bend and the other output path uses an on-chip matched waveguide load filled with an absorbing material. The power divider is fabricated using a micromachined waveguide technology employing a double H-plane split which results in low losses. Measured transmission and reflection coefficients are equal to -3.5 ± 0.4 dB at 231-330 GHz and between -10 dB and -20 dB at 220-320 GHz, respectively. A good agreement between the simulated and measured data was obtained by taking the microfabrication sidewall profile (undercut) into account in the simulations. To the best of our knowledge, this is the first time a low-loss micromachined power divider of this type is characterised within this frequency range.