25 January 2018 in IEEE Transactions on Terahertz Science and Technology
This letter reports for the first time on a very low loss silicon micromachined waveguide technology, implemented for the frequency band of 220–325 GHz. The waveguide is realized by utilizing a double H-plane split in a three-wafer stack. This ensures very low surface roughness, in particular on the top and bottom surfaces of the waveguide, without the use of any surface roughness reduction processing steps. This is superior to previous micromachined waveguide concepts, including E-plane and single H-plane split waveguides. The measured average surface roughness is 2.14 nm for the top/bottom of the waveguide, and 163.13 nm for the waveguide sidewalls. The measured insertion loss per unit length is 0.02–0.07 dB/mm for 220–325 GHz, with a gold layer thickness of 1 $\mu$m on the top/bottom and 0.3 $\mu$m on the sidewalls. This represents, in this frequency band, the lowest loss for any silicon micromachined waveguide published to date and is of the same order as the best metal waveguides.
23 November 2018 in IEEE Transactions on Terahertz Science and Technology
This letter presents two silicon-micromachined narrowband fourth-order waveguide filter concepts with center frequency of 450 GHz, which are the first narrowband submillimeter-wave filters implemented in any technology with a fractional bandwidth as low as 1%. Both filters designs are highly compact and have axial port arrangements, so that they can be mounted directly between two standard waveguide flanges without needing any split-block interposers. The first filter concept contains two TM 110 dual-mode cavities of circular shape with coupling slots and perturbations arranged in two vertically stacked layers, while the second filter concept is composed of four TE 101 series resonators arranged in a folded, two-level topology without crosscouplings. Prototype devices are fabricated in a multilayer chip platform by high-precision, low-surface roughness deep-silicon etching on silicon-on-insulator wafers. The measured passband insertion loss of two prototype devices of the dual-mode circular-cavity filters is 2.3 dB, and 2.6 dB for three prototypes of the folded filter design. The corresponding extracted unloaded quality factors of the resonators are 786 ± 7 and 703 ± 13, respectively, which are the best so far reported for submillimeter-wave filters in any technology. The presented filters are extremely compact in terms of size; their footprints have areas of only 0.53 and 0.55 mm 2 , respectively, and the thickness between the waveguide flanges is 0.9 mm.
21 November 2018 in IEEE Transactions on Terahertz Science and Technology
This paper reports on a turnstile-junction orthomode transducer (OMT) implemented by silicon micromachining in the 220-330-GHz band. Turnstile OMTs are very wideband and allow for co-planar ports but require accurate and complex geometries, which makes their fabrication challenging at higher frequencies. The compact 10 mm x 10 mm x 0.9 mm OMT-chip presented in this paper is the first micromachined full-band OMT in any frequency range and only the second turnstile OMT implemented above 110 GHz. The measured insertion loss (0.3 dB average, 0.6 dB worst case) and the cross polarization (60 dB average, 30 dB worst case) over the whole waveguide band represent the best performance of any wideband OMT, regardless of design or fabrication technology, in the 220-330-GHz band. The return loss with 22 dB average (16 dB worst case) is comparable with or better than previous works. This paper discusses design considerations and compromises of this complex 9-layer silicon micromachined device, including the influence of side-wall slopes, underetching, and postbonding misalignment between the chips. It is shown that for a device that is very sensitive to geometrical variations, such as a turnstile OMT, it is necessary to anticipate and compensate for any fabrication imperfections in the design to achieve high RF performance.
3 July 2020 in IEEE Transactions on Microwave Theory and Techniques
A D-band waveguide diplexer, implemented by silicon micromachining using releasable filling structure (RFS) technique to obtain high-precision geometries, is presented here for the first time. Prototype devices using this RFS technique are compared with devices using the conventional microfabrication process. The RFS technique allows etching large waveguide structures with nearly 90° sidewall angles for the 400-μm-tall waveguides. The diplexer consists of two direct-coupled cavity six-pole bandpass filters, with the lower and the upper band at 130-134 and 141-148.5 GHz, respectively. The measured insertion loss of the two bands is 1.2 and 0.8 dB, respectively, and the measured return loss is 20 and 18 dB, respectively, across 85% of the passbands. The worst case adjacent channel rejection is better than 59 dB. The unloaded quality factors of a single cavity resonator are estimated from the measurements to reach 1400. Furthermore, for the RFS-based micromachined diplexer, an excellent agreement between measured and simulated data was observed, with a center frequency shift of only 0.8% and a bandwidth deviation of only 8%. In contrast to that, for the conventionally micromachined diplexer of this high complexity, the filter poles are not well controllable, resulting in a large center frequency shift of 3.5%, a huge bandwidth expanding of over 60%, a poor return loss of 6 and 10 dB for the lower and the upper band, respectively, and an adjacent channel rejection of only 22 dB.
26 September 2018 in IEEE Microwave and Wireless Components Letters
This letter reports on a new low-loss and high-linearity 3-D wafer-level interposer technology enabled by through glass vias (TGVs) with an inverted via configuration. The proposed TGV utilizes a tapered via sidewall profile to achieve a void-free conformal metal coverage with lower process time and fewer fabrication steps than a fully filled conventional TGV. Measurement results for a single 100-μm-tall TGV show an insertion loss of 0.014 dB at 10 GHz and a dc resistance of 28 mΩ. Finally, this letter reports, for the first time, on nonlinearity measurements of TGVs. Single-tone measurements show that the third-harmonic level for a coplanar waveguide (CPW) TGV test structure is only 2 dB higher than a reference CPW through line without TGVs, indicating an overall excellent linearity performance.
25 September 2019 in IEEE Transactions on Terahertz Science and Technology
A new integration concept for THz systems is presented, wherein patterned silicon-on-insulator wafers form all DC, IF and RF networks in a homogeneous medium, in contrast to existing solutions. Using this concept, silicon-micromachined waveguides are combined with silicon germanium (SiGe) microwave monolithic integrated circuits (MMICs) for the first time. All features of the integration platform lie in the waveguide's H-plane. Heterogeneous integration of SiGe chips is achieved using a novel in-line H-plane transition. As an initial step towards complete systems, we outline the design, fabrication and assembly of back-to-back transition structures, for use at D-band frequencies (110 – 170 GHz). Special focus is given to the industrial compatibility of all components, fabrication and assembly processes, with an eye on the future commercialisation of THz systems. Prototype devices are assembled via two distinct processes, one of which utilises semi-automated die-bonding tools. Positional and orientation tolerances for each process are quantified. An accuracy of ±3.5 μm, ±1.5 ° is achieved. Measured S-parameters for each device are presented. The insertion loss of a single-ended transition, largely due to MMIC substrate losses, is 4.2 – 5.5 dB, with a bandwidth of 25 GHz (135 – 160 GHz). Return loss is in excess of 5 dB. Measurements confirm the excellent repeatability of the fabrication and assembly processes and thus their suitability for use in high-volume applications. The proposed integration concept is highly scalable, permitting its usage far into the THz frequency spectrum. This work represents the first stage in the shift to highly-compact, low-cost, volume-manufacturable THz waveguide systems.