1 January 2019 in Materials Research
GMGuilherme Arielo Rodrigues Maia
Guilherme Arielo Rodrigues Maia
DODanielle Cristina Silva Oliszeski
Danielle Cristina Silva Oliszeski
+3
Hybrid solar cells show an increasing number in researches due to its low cost and easy of production. They are composed by and organic material and a semiconductor oxide. The aim of this paper was to synthesis and characterize zinc oxide by coprecipitation and apply it in a hybrid solar cell that uses a P3HT/P3OT copolymer as charge carrier. The cell was assembled in "sandwich" form using FTO/ZnO/P3HT-P3OT as work electrode, (Pt/FTO) as conter electrode and I/I-3 redox couple as electrolyte. Through the X-ray diffractogram the formation of a single ZnO wutzite hexagonal phase was observed. The morphology obtained for the oxide was spherical. The results of photochronoamperometry showed current density values of jP3HT/P3OT =0.55 mA.cm-2 for the cell in the presence of the copolymer and the curve jxV showed an efficiency of 0.16% for the studied cell, demonstrating that the polymer was a satisfactory sensitizer.
24 May 2022 in Anti-Corrosion Methods and Materials
Purpose: The purpose of this paper is to evaluate the protection against corrosion of carbon steel SAE 1020 promoted by a niobium- and titanium-based coating produced from a resin obtained by the Pechini method. Design/methodology/approach: A resin was prepared with ammonium niobium oxalate as niobium precursor and K2TiF6 as titanium precursor. Carbon Steel SAE 1020 plates were dip coated in the resin and calcinated for 1 h at 600 ºC. Scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction were used to characterize the coating morphologically and structurally. Open circuit potential, electrochemical impedance spectroscopy, anodic potentiodynamic polarization and scanning vibrating electrode technique were used to evaluate the corrosion protection of the coating. Findings: The electrochemical analyses evidence slight protection against corrosion of the coating by itself; however, the needle-like crystal structure obtained may potentially provide a good anchorage site, suggesting the coating could be used as a pretreatment that may present similar application to phosphating processes, generating lower environmental impacts. Originality/value: Due to increasingly restrictive environmental laws, new environmentally friendlier surface treatments must be researched. This paper approaches this matter using a combination of niobium- and titanium-based coating, produced by a cleaner process, the Pechini method.
1 October 2020 in Materials Science Forum
EBEverson Do Prado Banczek
+1
Carbon steel is widely used in the industry due to its mechanical properties and low cost, but in contrast it resists poorly to corrosion, leading to economic losses and mechanical issues. The use of surface treatment is essential to extend the life of the metallic material. In this context, niobium is being studied for its great corrosion resistance properties. The aim of this paper was to produce and evaluate the corrosion protection of a niobium-based coating produced by the Pechini Method. The resin was applied in the metallic surface by dip-coating and then calcinated at 450 oC for 1 hour. The coated material was analyzed electrochemically by open circuit potential and potentiodynamic polarization, and morphologically by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The electrochemical analyses showed that the deposition of the coating increased the corrosion resistance and the morphological analyses indicated a homogenous coating with the presence of phases of NbO and NbO2.