27 May 2023 in The International Journal of Advanced Manufacturing Technology
Surface roughness is gaining increasing recognition in the processing design methods of additive manufacturing (AM) due to its role in many critical applications. This impact extends not only to various AM product manufacturing but also to indirect applications, such as molding and casting. This review article discusses the role of processing on the surface roughness of AM-printed polymers with limited post-processing by summarizing recent advances. This review offers a benchmark for surface quality improvement of AM processes, considering the surface roughness of polymeric parts. For this purpose, it lists and analyzes the key processes and various printing parameters used to monitor and adjust surface roughness under given constraints. Four AM techniques for manufacturing polymeric parts are compared: fused filament fabrication (FFF), selective laser sintering (SLS), vat photopolymerization (VPP), and material jetting (MJT). A review and discussion of recent studies are presented, along with the most critical process parameters that affect surface roughness for the selected AM techniques. To assist in selecting the most appropriate method of 3D printing, comparable research summaries are presented. The outcome is a detailed survey of current techniques, process parameters, roughness ranges, and their applicability in achieving surface quality improvement in as-printed polymers.
1 April 2009 in Journal of Instrumentation
1 February 2021 in Computational Materials Science
1 March 2020 in Computational Materials Science
29 November 2022 in The International Journal of Advanced Manufacturing Technology
Material jetting (MJT) is a recognized additive manufacturing (AM) method to combine various materials and create a wide range of designed appearances. However, the measured color of MJT objects is frequently different from the color provided in the printer software. As a result, estimating the color quality and the measured color attributes of an object before printing is vital for accurate color reproduction. This study investigates the color variation based on the texture in an object 3D-printed using the MJT method on a rotary tray. The novel radial shape of the rotary tray build platform and variation in the layers structure were targeted as the main factors that can increase the uncertainty in accurate color reproduction. The influence of the PolyJet printer setup has been examined by thickness variation of the colored layers, location on the tray (swath selection), ink color, and finish type between layers. Color quality was assessed by comparing the produced object color by calculating spectral and colorimetric differences. Spearman rank correlation coefficient and principal component analysis (PCA) methods were used to analyze the direct or indirect influence of independent categorical factors on the measured color variables. Based on the studied parameters, switching swathes did not fail printer objects for industrial color matching. In contrast, a thickness variation as small as 0.5 mm could cause CIEDE2000 above 5 for most models, resulting in unnatural color reproduction. Color differences in most objects might be discernible to inexperienced observers, depending on the 3D printing parameters.
4 January 2024 in Polymer Testing