Material jetting (MJT) is a recognized additive manufacturing (AM) method to combine various materials and create a wide range of designed appearances. However, the measured color of MJT objects is frequently different from the color provided in the printer software. As a result, estimating the color quality and the measured color attributes of an object before printing is vital for accurate color reproduction. This study investigates the color variation based on the texture in an object 3D-printed using the MJT method on a rotary tray. The novel radial shape of the rotary tray build platform and variation in the layers structure were targeted as the main factors that can increase the uncertainty in accurate color reproduction. The influence of the PolyJet printer setup has been examined by thickness variation of the colored layers, location on the tray (swath selection), ink color, and finish type between layers. Color quality was assessed by comparing the produced object color by calculating spectral and colorimetric differences. Spearman rank correlation coefficient and principal component analysis (PCA) methods were used to analyze the direct or indirect influence of independent categorical factors on the measured color variables. Based on the studied parameters, switching swathes did not fail printer objects for industrial color matching. In contrast, a thickness variation as small as 0.5 mm could cause CIEDE2000 above 5 for most models, resulting in unnatural color reproduction. Color differences in most objects might be discernible to inexperienced observers, depending on the 3D printing parameters.
In the last several years, deep learning has been introduced to recover a hyperspectral image (HSI) from a single RGB image and demonstrated good performance. In particular, attention mechanisms have further strengthened discriminative features, but most of them are learned by convolutions with limited receptive fields or require much computational cost, which hinders the function of attention modules. Furthermore, the performance of these deep learning methods is hampered by tackling multi-level features equally. To this end, in this paper, based on multiple lightweight densely residual modules, we propose a densely residual network with dual attention (DRN-DA), which utilizes advanced attention and adaptive fusion strategy for more efficient feature correlation learning and more powerful feature extraction. Specifically, an SE layer is applied to learn channel-wise dependencies, and dual downsampling spatial attention (DDSA) is developed to capture long-range spatial contextual information. All the intermediate-layer feature maps are adaptively fused. Experimental results on four data sets from the NTIRE 2018 and NTIRE 2020 Spectral Reconstruction Challenges demonstrate the superiority of the proposed DRN-DA over state-of-the-art methods (at least −6.19% and −1.43% on NTIRE 2018 “Clean” track and “Real World” track, −6.85% and −5.30% on NTIRE 2020 “Clean” track and “Real World” track) in terms of mean relative absolute error.
Materials with a complex visual appearance, like goniochromatic or non-diffuse, are widely used for the packaging industry. Measuring optical properties of such materials requires a bidirectional approach, and therefore, it is difficult and time consuming to characterize such a material. We investigate the suitability of using an image-based measurement setup to measure materials with a complex visual appearance and model them using two well-established reflection models, Cook–Torrance and isotropic Ward. It was learned that the complex materials typically used in the print and packaging industry, similar to the ones used in this paper, can be measured bidirectionally using our measurement setup, but with a noticeable error. Furthermore, the performance of the reflection models used in this paper shows big errors colorimetrically, especially for the goniochromatic material measured.
Realistic renderings of materials with complex optical properties, such as goniochromatism and non-diffuse reflection, are difficult to achieve. In the context of the print and packaging industries, accurate visualisation of the complex appearance of such materials is a challenge, both for communication and quality control. In this paper, we characterise the bidirectional reflectance of two homogeneous print samples displaying complex optical properties. We demonstrate that in-plane retro-reflective measurements from a single input photograph, along with genetic algorithm-based BRDF fitting, allow to estimate an optimal set of parameters for reflectance models, to use for rendering. While such a minimal set of measurements enables visually satisfactory renderings of the measured materials, we show that a few additional photographs lead to more accurate results, in particular, for samples with goniochromatic appearance.
We evaluate an image-based multiangle bidirectional reflectance distribution function measurement setup by comparing it to measurements from two commercially available goniospectrophotometers. The image-based setup uses an RGB camera to perform bidirectional measurements of the sample material. We use a conversion matrix to calculate luminance from the captured data. The matrix is calculated using camera spectral sensitivities that are measured with a monochromator. Radiance factor of the sample material is measured using a commercially available tabletop goniospectrophotometer and compared to measurements made using the image-based setup in the colorimetric domain. Our measurement setup is validated by comparing the measurements performed using a goniospectrophotometer. Uncertainty and error propagation is calculated and taken into account for validation. The sample material measured is wax-based ink printed on packaging paper substrate commonly used in the print and packaging industry. Results obtained show that the image-based setup can perform bidirectional reflectance measurements with a known uncertainty. The goniospectrophotometer measurements lie within the uncertainty of the measurements performed by the image-based measurement setup. The setup can be used to perform bidirectional reflectance measurements on samples with properties similar to the samples used in this paper.
The appearance of a surface depends on four main appearance attributes, namely color, gloss, texture, and translucency. Gloss is an important attribute that people use to understand surface appearance, right after color. In the past decades, extensive research has been conducted in the field of gloss and gloss perception, with different aims to understand the complex nature of gloss appearance. This paper reviews the research conducted on the topic of gloss and gloss perception and discusses the results and potential future research on gloss and gloss perception. Our primary focus in this review is on research in the field of gloss and the setup of associated psychophysical experiments. However, due to the industrial and application-oriented nature of this review, the primary focus is the gloss of dielectric materials, a critical aspect in various industries. This review not only summarizes the existing research but also highlights potential avenues for future research in the pursuit of a more comprehensive understanding of gloss perception.