Research Group of Battery Materials and Technologies Department of Mechanical and Materials Engineering Faculty of Technology University of Turku Turku 20014 Finland
Auto-generated profile, based on publicly available information
Gabriel Gonzalez
Research Group of Battery Materials and Technologies Department of Mechanical and Materials Engineering Faculty of Technology University of Turku Turku 20014 Finland
Fluorenones are suitable candidates for negolytes in flow batteries, as they demonstrate the ability to store 2 electrons, and can achieve reversibility, solubility, and stability with appropriate molecular design. However, limitations persist such as the use of alkaline media, high redox potentials, and a limited scope for optimization. Herein, azoniafluorenones is reported as a novel class of negolytes. They can be readily accessed in a highly modular fashion from inexpensive commercially available materials (e.g., boronic acids). Variations in the substitution patterns reveal the 3‐substituted N‐alkylated AZON3, which demonstrates excellent solubility at neutral pH (1.64 m) with two low reversible redox potentials (−0.31 and −0.58 V vs Ag/AgCl). AZON3 exhibits high stability when evaluated at high concentration in a neutral supporting electrolyte (1 m in 3 m KCl), paired with BTMAP‐Fc on the positive side. Capacity retentions of 99.95% and 99.91% per cycle (99.35% and 99.21% per day) are achieved when cycling with 1 and 2 electrons, respectively, coupled with high volumetric capacity of 46.4 Ah L−1 (87% of capacity utilization).
Viologen derivatives feature two reversible one‐electron redox processes and have been extensively utilized in aqueous organic flow batteries (AOFBs). However, the early variant, methyl viologen (MVi), exhibits low stability in aqueous electrolytes, restricting its practical implementation in AOFB technology. In this context, leveraging the tunability of organic molecules, various substituents have been incorporated into the viologen core to achieve better stability, lower redox potential, and improved solubility. In this work, we introduce bisphosphonate‐substituted viologens (BBPE−Vi and MBPE−Vi) as candidates for AOFBs. The bulkiness and negative charges of the bisphosphonate groups enhance the solubility and the electrostatic repulsion among viologen molecules, minimizing the bimolecular side reactions that lead to degradation. Additionally, the electron‐rich character of this new substituent in its deprotonated state significantly lowers the redox potential. As a result, the proposed viologen derivatives exhibit high solubility (1.45 M in water) and stability (capacity decay of 0.009 %/cycle or 0.229 %/day when tested at 0.5 M). These parameters are coupled with the lowest redox potentials exceeding all previously reported viologens utilized in AOFBs (−0.503 V and −0.550 V against SHE for MBPE−Vi and BBPE−Vi, respectively).
Pyridoxal hydrochloride, a vitamin B6 vitamer, was synthetically converted to a series of diverse redox‐active benzoyl pyridinium salts. Cyclic voltammetry studies demonstrated redox reversibility under basic conditions, and two of the most promising salts were subjected to laboratory‐scale flow battery tests involving galvanostatic cycling at 10 mM in 0.1 M NaOH. In these tests, the battery was charged completely, corresponding to the transfer of two electrons to the electrolyte, but no discharge was observed. Both CV analysis and electrochemical simulations confirmed that the redox wave observed in the experimental voltammograms corresponds to a two‐electron process. To explain the irreversibility in the battery tests, we conducted bulk electrolysis with the benzoyl pyridinium salts, affording the corresponding benzylic secondary alcohols. Computational studies suggest that the reduction proceeds in three consecutive steps: first electron transfer (ET), then proton‐coupled electron transfer (PCET) and finally proton transfer (PT) to give the secondary alcohol. 1H NMR deuterium exchange studies indicated that the last PT step is not reversible in 0.1 M NaOH, rendering the entire redox process irreversible. The apparent reversibility observed in CV at the basic media likely arises from the slow rate of the PT step at the timescale of the measurement.
The study of flow batteries (FBs) requires the development of tools able to evaluate their performance during operation in a reliable and simple way. In this work, we present an experimental set‐up that allows the on‐line monitoring of the half‐cells state of charge and apparent overpotentials on the positive and negative electrodes during battery operation. These measurements are feasible by using additional flow cells that include a reference electrode on each side. We used the experimental set‐up to study the performance of the vanadium system as well as a previously reported stable organic couple. The studies consisted on short cycling operation at different current densities and polarization curves at different flow rates and states of charge. By confirming previous results obtained for vanadium‐FBs and extending the analysis to further systems, we demonstrated that this approach provides a reliable deeper insight into the battery performance and the processes taking place during operation.
Iron(II) complexes with 1,10‐phenanthroline (phen) and 2,2′;6′,2“‐terpyridine (terpy) ligands bearing different functional groups (methyl, 4‐pyridyl, chloro, carboxylic acid) were evaluated for aqueous flow battery applications, detecting oxidation processes followed by coupled chemical reactions. Redox potentials of these compounds were sufficiently high for suitable positive electrolytes (0.88–1.29 V vs. SHE). Randles‐Ševčík equation and finite element modelling with COMSOL Multiphysics were utilized in evaluating the diffusion coefficient and the apparent rates of the electron transfer and coupled chemical reactions for the compounds studied by cyclic voltammetry. The systems experience weak adsorption of reactants at glassy carbon, leading to difficulties in determining the latter kinetic parameters. Flow battery tests indicate sufficient flow battery performance with dimethyl functionalized phenanthroline complex [Fe(II)(DMe‐phen)3]2+ with 0.06 % per cycle (2.78 % per day) capacity decay. However, [Fe(II)(DMe‐phen)3]2+, as well as [Fe(II)(phen)3]2+, experience the discharge at two different thermodynamic conditions, suggesting dimer discharge as the source of the lower voltage plateau. The energy efficiency of [Fe(II)(DMe‐phen)3]2+ battery was improved by cycling at higher cut‐off voltage for 10 cycles, after which the lost capacity was recovered with lower cut‐off voltage in one cycle. [Fe(II)(terpy)2]2+ had too many side reactions at lower potentials to be suitable for flow battery applications.