Research Group of Battery Materials and Technologies, Department of Mechanical and Materials Engineering, University of Turku, Vesilinnantie 5, Turku, FI-20014, Finland
Auto-generated profile, based on publicly available information
Jenna Hannonen
Research Group of Battery Materials and Technologies, Department of Mechanical and Materials Engineering, University of Turku, Vesilinnantie 5, Turku, FI-20014, Finland
Fluorenones are suitable candidates for negolytes in flow batteries, as they demonstrate the ability to store 2 electrons, and can achieve reversibility, solubility, and stability with appropriate molecular design. However, limitations persist such as the use of alkaline media, high redox potentials, and a limited scope for optimization. Herein, azoniafluorenones is reported as a novel class of negolytes. They can be readily accessed in a highly modular fashion from inexpensive commercially available materials (e.g., boronic acids). Variations in the substitution patterns reveal the 3‐substituted N‐alkylated AZON3, which demonstrates excellent solubility at neutral pH (1.64 m) with two low reversible redox potentials (−0.31 and −0.58 V vs Ag/AgCl). AZON3 exhibits high stability when evaluated at high concentration in a neutral supporting electrolyte (1 m in 3 m KCl), paired with BTMAP‐Fc on the positive side. Capacity retentions of 99.95% and 99.91% per cycle (99.35% and 99.21% per day) are achieved when cycling with 1 and 2 electrons, respectively, coupled with high volumetric capacity of 46.4 Ah L−1 (87% of capacity utilization).
25 October 2023 in Journal of Electroanalytical Chemistry
Pyridoxal hydrochloride, a vitamin B6 vitamer, was synthetically converted to a series of diverse redox‐active benzoyl pyridinium salts. Cyclic voltammetry studies demonstrated redox reversibility under basic conditions, and two of the most promising salts were subjected to laboratory‐scale flow battery tests involving galvanostatic cycling at 10 mM in 0.1 M NaOH. In these tests, the battery was charged completely, corresponding to the transfer of two electrons to the electrolyte, but no discharge was observed. Both CV analysis and electrochemical simulations confirmed that the redox wave observed in the experimental voltammograms corresponds to a two‐electron process. To explain the irreversibility in the battery tests, we conducted bulk electrolysis with the benzoyl pyridinium salts, affording the corresponding benzylic secondary alcohols. Computational studies suggest that the reduction proceeds in three consecutive steps: first electron transfer (ET), then proton‐coupled electron transfer (PCET) and finally proton transfer (PT) to give the secondary alcohol. 1H NMR deuterium exchange studies indicated that the last PT step is not reversible in 0.1 M NaOH, rendering the entire redox process irreversible. The apparent reversibility observed in CV at the basic media likely arises from the slow rate of the PT step at the timescale of the measurement.
Iron(II) complexes with 1,10‐phenanthroline (phen) and 2,2′;6′,2“‐terpyridine (terpy) ligands bearing different functional groups (methyl, 4‐pyridyl, chloro, carboxylic acid) were evaluated for aqueous flow battery applications, detecting oxidation processes followed by coupled chemical reactions. Redox potentials of these compounds were sufficiently high for suitable positive electrolytes (0.88–1.29 V vs. SHE). Randles‐Ševčík equation and finite element modelling with COMSOL Multiphysics were utilized in evaluating the diffusion coefficient and the apparent rates of the electron transfer and coupled chemical reactions for the compounds studied by cyclic voltammetry. The systems experience weak adsorption of reactants at glassy carbon, leading to difficulties in determining the latter kinetic parameters. Flow battery tests indicate sufficient flow battery performance with dimethyl functionalized phenanthroline complex [Fe(II)(DMe‐phen)3]2+ with 0.06 % per cycle (2.78 % per day) capacity decay. However, [Fe(II)(DMe‐phen)3]2+, as well as [Fe(II)(phen)3]2+, experience the discharge at two different thermodynamic conditions, suggesting dimer discharge as the source of the lower voltage plateau. The energy efficiency of [Fe(II)(DMe‐phen)3]2+ battery was improved by cycling at higher cut‐off voltage for 10 cycles, after which the lost capacity was recovered with lower cut‐off voltage in one cycle. [Fe(II)(terpy)2]2+ had too many side reactions at lower potentials to be suitable for flow battery applications.
We have examined the utility of pyridoxal hydrochloride, a vitamin B6 vitamer and a biobased feedstock, as a starting point towards organic redox flow battery materials. Pyridoxal hydrochloride was synthetically converted to a series of diverse vitamin B6-based redox-active benzoyl pyridinium salts. These compounds were electrochemically characterized through cyclic voltammetry (CV) measurements in neutral and basic aqueous electrolytes (1 M KCl and 0.1 M NaOH). Based on the CV results, which demonstrated reversibility under basic conditions, two of the most promising salts were subjected to laboratory-scale redox flow battery tests involving galvanostatic cycling at 10 mM with 0.1 M NaOH as the supporting electrolyte. These results showed that the battery was charged completely, corresponding to the transfer of two electrons to the electrolyte, but no discharge was observed. Both CV analysis and electrochemical simulations confirmed that the redox wave observed in the experimental voltammograms corresponds to a two-electron process. To explain the irreversibility in the battery tests, we conducted bulk electrolysis with the benzoyl pyridinium salts, affording the corresponding benzylic secondary alcohols. This process involves the transfer of two electrons and two protons to reduce the ketone group to alcohol. Computational studies suggest that the reduction proceeds in three consecutive steps: first electron transfer (ET), then proton-coupled electron transfer (PCET) and finally proton transfer (PT). 1H NMR deuterium exchange studies indicated that the last PT step is not reversible in 0.1 M NaOH, rendering the entire redox process irreversible. The apparent reversibility observed in CV at the basic media likely arises from the slow rate of the PT step at the timescale of the measurement.