Direct model predictive control (MPC) with reference tracking, also referred to as finite control set MPC (FCS-MPC), has gained significant attention in recent years, mainly from the academic community. Thanks to its applicability to a wide range of power electronic systems, it is considered a promising control method for such systems. However, to simplify the design, researchers frequently make choices that - often unknowingly - reduce the system performance. We discuss and analyze in this paper the factors that affect the closed-loop performance of FCS-MPC. Based on these findings, design guidelines are provided that help to maximize the system performance. To highlight the performance benefits, two case studies will be considered; the first one consists of a two-level converter and an induction machine, whereas the second one adds an LC filter between the converter and the machine.
20 October 2021 in IEEE Transactions on Power Electronics
The application of model predictive control in electrical drives has been studied extensively in the past decade. This article presents what the authors consider the most relevant contributions published in the last years, mainly focusing on three relevant issues: weighting factor calculation when multiple objectives are utilized in the cost function, current/torque harmonic distortion optimization when the power converter switching frequency is reduced, and robustness improvement under parameters uncertainties. Therefore, this article aims to enable readers to have a more precise overview while facilitating their future research work in this exciting area.
28 August 2020 in IEEE Open Journal of Industry Applications
Model predictive control (MPC) has established itself as a promising control methodology in power electronics. This survey paper highlights the most relevant MPC techniques for power electronic systems. These can be classified into two major groups, namely, MPC without modulator, referred to as direct MPC, and MPC with a subsequent modulation stage, known as indirect MPC. Design choices and parameters that affect the system performance, closed-loop stability and controller robustness are discussed. Moreover, solvers and control platforms that can be employed for the real-time implementation of MPC algorithms are presented. Finally, the MPC schemes in question are assessed, among others, in terms of design and computational complexity, along with their performance and applicability depending on the power electronic system at hand.
This paper presents the application of Model Predictive Control (MPC) in high-performance drives. A wide variety of machines have been considered: induction machines, synchronous machines, linear motors, switched reluctance motors, and multiphase machines. The control of these machines has been done by introducing minor and easy-to-understand modifications to the basic predictive control concept, showing the high flexibility and simplicity of the strategy. The second part of the paper is dedicated to the performance comparison of MPC with classical control techniques such as field-oriented control and direct torque control. The comparison considers the dynamic behavior of the drive and steady-state performance metrics such as inverter losses, current distortion in the motor, and acoustic noise. The main conclusion is that MPC is very competitive concerning classic control methods by reducing the inverter losses and the current distortion with comparable acoustic noise.
28 November 2019 in IEEE Transactions on Power Electronics
Long-horizon finite-control-set model predictive control is implemented on a field-programmable gate array (FPGA). To solve the underlying least-squares integer program, a non-recursive sphere decoding algorithm is developed. By exploiting the problem structure, few multipliers are required, and the algorithm computes the optimal solution in a few clock cycles, thus achieving a resource-efficient implementation on the FPGA. For a prediction horizon of five steps and a three-level converter, 87 digital signal processor (DSP) blocks and an execution time of at most 13.4's was required to solve the optimization problem during steady-state operation. Experimental results verify the effectiveness of the long-horizon controller.
23 July 2020 in IEEE Transactions on Control Systems Technology
This article proposes two alternatives of a direct model predictive control (MPC) scheme for a three-phase two-level grid-connected converter with an LCL filter. Although both approaches are implemented as direct control methods, i.e., they combine control and modulation in one computational stage, they operate the converter at a constant switching frequency and generate a discrete grid current harmonic spectrum. To achieve this, the first method allows for one switching transition per phase and sampling interval, implying that a fixed modulation cycle akin to pulsewidth modulation (PWM) results. Moreover, by appropriately designing the objective function of the optimization problem underlying MPC, grid current distortions similar to those of space vector modulation (SVM) are produced. As for the second approach, two phases are allowed to switch per sampling interval, emulating the behavior of discontinuous PWM. Consequently, due to the introduced formulations, harmonic limitations imposed by relevant grid codes can be met with the proposed methods. Furthermore, due to the multiple-input multiple-output (MIMO) nature of both approaches, all output variables of the system can be simultaneously controlled. Finally, the inherent full-state information of MPC renders an additional active damping loop unnecessary, further simplifying the controller design. The presented performance assessment highlights the potential benefits of both proposed MPC-based algorithms.