Aniket Vasantarao Kataware

Aniket Vasantarao Kataware

Auto-generated profile, based on publicly available information

Aniket Vasantarao Kataware

Indian Institute of Technology Dharwad

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2017 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
DSDharamveer Singh
Dharamveer Singh
PAPrabin Kumar Ashish
Prabin Kumar Ashish
AKAniket Kataware
Aniket Kataware
AHAyyanna Habal
Ayyanna Habal
Modification of asphalt binder with Elvaloy (Elv) and polyphosphoric acid (PPA) has been reported to have better performance. However, such modification may increase mixing and compaction temperatures of asphalt binder. Furthermore, the positive effect of PPA may get neutralized with the addition of lime, which can lead to inferior performance of asphalt binders. Recently, different types of warm mix additives (WMA) are being introduced to reduce production and construction temperatures of asphalt binder. However, the effects of WMA additives with and without lime on various rheological response of PPA + Elv modified asphalt binder is not well understood so far. Therefore, the present study was undertaken to evaluate the rutting and fatigue performance of PPA + Elv modified asphalt binder (referred as Control binder) containing three WMA additives (water, chemical, and wax-based) with and without lime. The multiple stress creep recovery (MSCR) and linear amplitude sweep (LAS) tests were conducted to capture the rutting and fatigue performance of asphalt binders, respectively. The results show that rutting and fatigue performance of Control asphalt binder decreased with the addition of chemical and water-based WMA additives. The performance of Control asphalt binder further deteriorated when these WMA additives (chemical and water) were used with lime. Interestingly, the addition of wax showed higher rutting resistance and similar fatigue life as that of Control asphalt binder. The addition of lime with wax additive showed improved rutting resistance and reduced fatigue life compared with Control asphalt binder. Regardless of the type of WMA additives, the addition of lime decreased the fatigue life of Control asphalt binder. The adverse effect of lime was prominent when used with wax compared with water and chemical-based WMA additives. Furthermore, the addition of WMA additives increased the stress sensitivity of Control asphalt binder. The stress sensitivity of asphalt binder further increased when wax and chemical-based WMA additives were used with lime. However, use of water-based WMA additive and lime reduced the stress sensitivity of Control asphalt binder. Overall, it can be concluded that the performance of Elv + PPA modified asphalt binder depends largely on the type of WMA additives and their combination with lime.

1 October 2018 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
AKAniket Vasantrao Kataware
Aniket Vasantrao Kataware
DSDharamveer Singh
Dharamveer Singh
Production of hot-mix asphalt (HMA) involves high mixing and compaction temperatures, which leads to the emission of greenhouse gases and high fuel consumption. Recently, various warm-mix asphalts (WMAs) have been used for production of asphalt mixes to promote a cleaner environment and better working conditions. Although selected WMA additives may be beneficial in reducing the mixing and compaction temperatures of a binder, they may also adversely affect rheological properties of asphalt binders and thus may discourage users from fully utilizing their potential. The current study evaluates effects of different types of WMA additives on mixing and compaction temperatures, rut resistance, and fatigue performance of an AC-30 binder. A control AC-30 was modified with three WMA [Fischer Tropsch (FT) wax based, water based (WB), and chemical surfactant based (CS)] additives in varying dosages. First, the effect of WMA additives on the viscosity of the AC-30 binder was measured, followed by the effect on mixing and compaction temperatures. Thereafter, rutting and fatigue performance of the AC-30 with and without different WMA additives was evaluated using multiple stress creep recovery (MSCR) and linear amplitude sweep (LAS), respectively. Further, effects of WMA additives on Superpave high-temperature performance grade (PG) of AC-30 was also determined. The paper also discusses changes in chemical composition of AC-30 binder after addition of WMA additives, which was evaluated using the Fourier transform infrared spectroscopy (FTIR) technique. All three WMA additives (FT, WB, and CS) decreased mixing and compaction temperatures of AC-30, except the addition of 8% WB. Superpave high PG of AC-30 did not alter with the addition of WB and CS. Fatigue and rutting performances of AC-30 degraded after addition of WB and CS. The effect of FT was found to be promising not only in enhancing rutting and fatigue performances but also to bump the Superpave high PG of AC-30. Considering reductions in mixing and compaction temperatures and other rheological performances, the effective dosages of FT, WB, and CS for AC-30 binder were found to be 1, 4, and 1%, respectively.

24 May 2024 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
NDN. Darshan
N. Darshan
AKAniket V. Kataware
Aniket V. Kataware

10 August 2016 in Innovative Infrastructure Solutions
Verified
Journal Article
Open access
PDF file
DSDharamveer Singh
Dharamveer Singh
AKAniket V. Kataware
Aniket V. Kataware
It is important to understand rutting susceptibility of asphalt binders at laboratory scale to ensure a long lasting pavement. Researchers have reported applicability of four rheological parameters: (1) Superpave parameter—G*/sinδ (2) Shenoy’s parameter—G*/(1−(1/tanδsinδ)), (3) non-recoverable creep compliance—J nr, measured from multiple stress creep recovery test and (4) zero shear viscosity (ZSV) to evaluate rutting resistance of binders. However, comparison of these rutting parameters for warm mix additives (WMA) modified asphalt binders have not been reported in open literature. Thus, this study was undertaken to evaluate rutting performance of a SBS co-polymer modified binder (PMB40) containing three WMA additives using four rheological parameters listed above. Three different WMA additives: wax based (Sasobit®), water based (Advera®) and surfactant based (Rediset®) were selected in this study. Based on three parameters (Superpave, Shenoy and J nr), it was found that addition of Sasobit® and Advera® help to improve rut resistance of PMB40 binder while Rediset® decreases rut resistance of the binder. The ZSV showed rut resistance improvement for all the additives, which is contrary to the results obtained from other three parameters. Both the Superpave and Shenoy parameters showed a similar trend in rutting resistance of the binder. The optimum dosage of Advera® and Sasobit® was determined based on the Superpave, Shenoy and J nr parameters. Since, the addition of Rediset® resulted in decrease in rutting behavior, optimum dosage of Rediset® could not be ascertained. A good correlation was found between the Superpave rutting parameter (G*/sinδ) and other three parameters (G*/(1 − (1/tanδsinδ)), ZSV, and J nr). The outcome of this study showed that, J nr may be considered as a reliable rut parameter due to realistic test conditions associated with it. The Superpave parameter is more conservative compared to Shenoy parameter, and thus it may still be considered as an important rutting parameter in the absence of J nr. The ZSV needs further validation to comment on its applicability.

17 August 2018 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
AKAniket Vasantrao Kataware
Aniket Vasantrao Kataware
DSDharamveer Singh
Dharamveer Singh
Warm Mix Asphalt (WMA) additives have been utilised to reduce working temperatures of Styrene-Butadiene-Styrene modified (SBS) binder to make sustainable pavement with enhanced pavement performance and lower energy consumption. Such modification may change the physicochemical structure of SBS binder and can influence rheological properties. The present study aimed at investigating the effect of short-term ageing on SBS binder containing various types of WMA additives. The experimental design included SBS binder, three WMA additives (Fischer Tropsch wax based- FT, chemical surfactant based- CS and water-based- WB) in three different dosages. The SBS binder was modified with mentioned WMA additives using a high shear mixer. In such way, 10 asphalt binders (one SBS binder and nine WMA modified SBS binders) were prepared. The short-term ageing of asphalt binders was performed using thin film oven. The high-temperature performance of unaged and short-term aged binders was evaluated using Superpave rutting parameter, high temperature performance grade (PG), multiple stress creep and recovery test (MSCR), and frequency sweep test. Based on the results, the short-term ageing showed an adverse effect on high-temperature performance of SBS binder, indicating degradation of SBS binder. Also, WMA additive type and dosages showed a significant effect on SBS binder in unaged and short-term aged condition. Considering the combined effect of WMA additive and short-term ageing, FT and WB additives reduced ageing susceptibility as well as improved rutting resistance of SBS binder. On the other hand, CS modification was able to lower ageing susceptibility, however, degraded high-temperature performance of SBS binder. Based on optimal high-temperature performance and lower ageing susceptibility, SBS binder can be modified with an effective dosage of 1% FT, 6% WB and 1% CS additive (by weight of asphalt binder).

23 September 2025 in Construction and Building Materials
Verified
Journal Article
Closed access
SSShubham Suryawanshi
Shubham Suryawanshi
AKAniket Kataware
Aniket Kataware
SASarfaraz Ahmed
Sarfaraz Ahmed