15 November 2024 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Model-based Optical Proximity Correction (OPC) with Sub-Resolution Assist Feature (SRAF) generation is a critical standard practice for compensating lithography distortions in the fabrication of integrated circuits at advanced technology nodes. Typical model-based OPC and SRAF algorithms involve the selection of user-controlled rule parameters. Conventionally, these rules are heuristically determined and applied globally throughout the correction regions, which can be time-consuming and require expert knowledge of the tool. Additionally, the correlations of rule parameters to the objectives are highly nonlinear. All these factors make designing a high-performance OPC engine for complex metal designs a non-trivial task. This paper proposes RuleLearner, a comprehensive mask optimization system designed for SRAF generation and model-based OPC in real industrial scenarios. The proposed framework learns from the guidance of an information-augmented ILT engine, which, although expressive for complex designs, is expensive to generate refined masks for a whole set of design clips. Considering the non-linearity and the trade-off between local and global performance, the extracted rule value distributions are further optimized with customized natural gradients. The sophisticated SRAF generation, the edge segmentation and movements are then guided by the rule parameter. Experimental results show that RuleLearner can be applied across different complex design patterns and achieve the best lithographic performance and computational efficiency.
17 March 2025 in ACM Transactions on Design Automation of Electronic Systems
The photolithography process is getting more sophisticated with technology node scaling down and VLSI designs becoming complex. As photomask patterns get finer, mask rule checks (MRCs) are inevitable to avoid discrepancies in the layout and to ensure manufacturability. This paper introduces an efficient mask rule checking approach that utilizes a representative edge sampling scheme. The representative edge sampling scheme selects a subset of edges and points of each polygon that capture its contour, meanwhile greatly reducing the number of edges involved in actual checking. Experimental results demonstrate that the proposed approach achieves significant speedup compared with the state-of-the-art academic tool.
1 July 2025 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
The scale of large language models (LLMs) has steadily increased over time, leading to enhanced performance in multimodal understanding and complex reasoning, but with significant execution overhead on hardware. Quantization is a promising approach to reduce computation and memory overhead for LLM deployment. However, maintaining accuracy and efficiency simultaneously is challenging due to the presence of outliers. Moreover, low-bit quantization tends to deteriorate accuracy due to its limited precision. Existing outlier-aware quantization/hardware co-design methods split the sparse outliers from the normal values with dedicated encoding schemes. However, such separation produces a nonuniform data format for normal values and outliers, leading to additional hardware design and inefficient memory access. This article presents an outlier-isolated data format (Oiso) for low-bit LLM quantization called Oiso. Oiso is a unified representation for both outliers and normal values. It isolates the normal values from the outliers, which can reduce the impact of outliers on the normal values during the quantization process. Taking advantage of the uniform format, Oiso arithmetic can be performed using a homogeneous computational unit, and Oiso values can be stored in a standardized format. Hierarchical block encoding with a subblock alignment scheme is introduced to reduce the encoding cost and the hardware overhead. We introduce the Oiso architecture, equipped with Oiso processing elements and encoders tailored for Oiso arithmetic, realizing efficient low-bit LLM inference. Oiso quantization can push the limits of low-bit LLM quantization, and the Oiso accelerator outperforms the state-of-the-art outlieraware accelerator design with $1.26\times $ performance improvement and 25% energy reduction.
14 June 2026 in ACM Transactions on Design Automation of Electronic Systems
Mask optimization in lithography is becoming increasingly important as the technology node size shrinks down. Inverse Lithography Technology (ILT) remains one of the most robust and high-performance solutions adopted in industry, yet it suffers from significant computational overhead and complexity. With the growing scale of transistor integration, industry attention has shifted toward improving efficiency and workload scalability. However, most recent academic efforts remain confined to localized pattern restoration regardless of full-chip manufacturing conditions. In this work, we present FuILT-S , a practical full-chip ILT-based mask optimization framework that incorporates sub-resolution assist features (SRAFs) co-optimization to address real-world manufacturing challenges. To enable full-chip scalability, we build a multi-level partitioning strategy following the divide-and-conquer mindset, paired with a workload distribution framework for efficient multi-GPU parallelization. To fix inter-region boundary stitching artifacts, we propose a gradient-fusion technique alongside a multi-level healing strategy. Furthermore, by leveraging rich information from the fused gradient and mask intensity maps, we integrate an SRAF generation module co-optimized with the main layout patterns. Experimental results across different layers from real-world designs demonstrate that FuILT-S is both effective and generalizable. Our framework is open-sourced at https://github.com/OpenOPC/OpenFuILT.