Head injuries account for 15%–20% of all military injuries and pose a high risk of causing functional disability and fatality. Blunt ballistic impacts are one of the threats that can lead to severe head injuries. This review aims to examine the mechanisms and injury risk assessment associated with blunt ballistic head injury (BBHI). The review further discusses research methods and instrumentation used in BBHI studies, focusing on their limitations and challenges. Studies on the mechanisms of focal and diffuse brain injuries remain largely inconclusive and require further effort. Some studies have attempted to associate BBHIs with head mechanics, but more research is required to establish correlations between head mechanics and injury severity. Limited access to experimental models and a lack of instrumentation capable of measuring the mechanics of brain tissue in situ are potential reasons for the lack of understanding of injury mechanisms, injury correlations, and injury tolerance levels specific to this loading regime. Targeted research for understanding and assessing head injuries in blunt ballistic impacts is a necessary step in improving our ability to design protection systems to mitigate these injuries.
3 February 2023 in Journal of Biomechanical Engineering
The circumstances in which we mechanically test and critically assess human calvarium tissue would find relevance under conditions encompassing real-world head impacts. These conditions include, among other variables, impact velocities, and strain rates. Compared to quasi-static loading on calvaria, there is less reporting on the impact loading of the calvaria and consequently, there are relatively fewer mechanical properties on calvaria at relevant impact loading rates available in the literature. The purpose of this work was to report on the mechanical response of 23 human calvarium specimens subjected to dynamic four-point bending impacts. Impacts were performed using a custom-built four-point impact apparatus at impact velocities of 0.86–0.89 m/s resulting in surface strain rates of 2–3/s—representative of strain rates observed in vehicle collisions and blunt impacts. The study revealed comparable effective bending moduli (11–15 GPa) to the limited work reported on the impact mechanics of calvaria in the literature, however, fracture bending stress (10–47 MPa) was relatively less. As expected, surface strains at fracture (0.21–0.25%) were less compared to studies that performed quasi-static bending. Moreover, the study revealed no significant differences in mechanical response between male and female calvaria. The findings presented in this work are relevant to many areas including validating surrogate skull fracture models in silico or laboratory during impact and optimizing protective devices used by civilians to reduce the risk of a serious head injury.
In cycling, oblique head impacts from a fall cause rotational motion of a cyclist’s head and it is rotational kinematics that are most commonly associated with mild and severe brain injuries. This study aims to compare the head kinematics and brain strain response between two oblique test protocols for simulating fall impact events in cycling. (1) The Angular Launched Impact (ALI) protocol simulates a head impact for realistic and typical falling events in cycling such as falling over the bicycle handle bars or laterally falling, and (2) EN13087-11 is a currently proposed standard test that simulates a head impact from a vertical fall onto an angled surface. EN13087-11 reported greater rotational head kinematics and brain tissue strain than occurs in the more frequent and realistic falling events simulated by the ALI. Differences in response are attributed to the different vector of impact forces associated with the ALI and EN13087-11. When considering how best to test a helmet under oblique impact conditions, it is recommended that a certification test should closely mimic real-world kinematics of cycling accidents.