1 November 2020 in Engineering Structures
1 February 2016 in Journal of Hydraulic Engineering
An experimental campaign of 25 long-duration (13–47 days) laboratory tests was carried out with three complex pier models under steady clear-water flow conditions. Each model, characterized by a different relation between the column and the pile-cap widths, Dc/Dpc, was tested for a variety of pile-cap positions relatively to the initial bed, Hc. The experimental data were used to describe the temporal evolution of the scour depth as a function of Hc/h (h = approach flow depth). The common criterion to stop experimental tests on complex piers was analyzed, and a new criterion was introduced. The equilibrium scour depth, dse, was calculated by extrapolation of data series. The results are used to evaluate the effect of Dc/Dpc and Hc/h on dse when the pile cap is above the bed (Situation 1), partially buried in the bed (Situation 2), and completely buried in the bed (Situation 3). The analysis includes the definition of Hc at which the maximum dse occurs through an equation that takes into account th...
1 November 2016 in Journal of Hydraulic Engineering
At present, bridges are frequently built with geometries that consist of a column founded on a pile cap and supported by an array of piles, referred to as common complex piers or most often (as also in this paper), briefly, as complex piers. This paper addresses prediction of local scour depth at those complex piers. An experimental campaign of 48 long-duration tests was performed with seven complex pier models under steady clear-water flow conditions to quantify the influence of the relative column width, Dc/Dpc (Dc = column width, Dpc = pile cap width), the relative pile cap thickness, T/h (T = pile cap thickness, h = approach flow depth), and the pile-group configuration on the equilibrium scour depth, dse. Several tests were carried out for the possible range of variations in the pile cap position relatively to the initial bed level. The values of dse were estimated by extrapolation of the experimental data series. The performance of three methods, i.e., Auckland, HEC-18, and Florida Departmen...
5 September 2018 in E3S Web of Conferences
Local scouring around bridge foundations is a major reason for bridge collapse worldwide. It occurs due to the formation of vortices around bridge foundations as a result of changing the unidirectional approach flow into the three-dimensional field in an erodible channel bed, leading to the development of a scour hole in its vicinity. In the present work, two different techniques were applied for a full characterization of the scour hole geometry developed in a sand bed flume experiment by means of a Kinect sensor and a close-range photogrammetry. These advanced survey and sensor technologies offer efficient techniques of deriving point clouds and Digital Elevation Models (DEMs), respectively. The potential, limitations and results of both techniques are herein examined and conveniently compared, including a description of measurement devices, reference points and respective software. Reliable and accurate estimates of the topographic representation of the scour hole and inherent features were obtained. The design of the bridge pier used, with a 0.14 m wide rectangular round-nose concrete column (henceforth termed as oblong pier), replicates the typical shape used in the 19th and 20th centuries, and are the most common in Portugal.