1 March 2015 in Sensors and Actuators B: Chemical
7 October 2023 in International Journal of Mechanical Sciences
30 October 2017 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
The detection of plastic deformation of metallic alloy materials with second-harmonic Rayleigh ultrasonic wave is first investigated using direct-write piezoelectric ultrasonic transducers, in which piezoelectric poly(vinylidenefluoride/ trifluoroethylene) [P(VDF/TrFE)] polymer coatings and electrodes are directly deposited, processed, and patterned on the alloy to be evaluated. Rayleigh ultrasonic signals, generated by the direct-write transducers on titanium alloy specimens, are characterized by a laser scanning vibrometer. The results show that acoustic nonlinearity increases with plastic strain, and an increase of ~40% in the acoustic nonlinearity corresponding to a plastic strain of 5.1%. The measurement data and technical features with the use of the direct-write transducers are compared with the conventional discrete angle beam piezoelectric transducer. The results and analyses show that compared with the conventional discrete angle beam piezoelectric transducers, implementation of the direct-write piezoelectric transducers has significant technical advantages and is promising for applications in determining nonlinear ultrasonic waves and plastic strain of structural materials.
7 February 2022 in IEEE Sensors Journal
The use of carbon fiber reinforced polymer (CFRP) composites is gaining popularity in various industries. Due to its anisotropic nature, the characterization of the mechanical properties of CFRP is challenging. The current practices for determination of the elastic properties of CFRP materials are through destructive testing methods, which is not feasible in many in-situ scenarios. This paper presents an in-situ and non-destructive method to characterize elastic properties of CFRP plates by using an ultrasonic 2D-array transducer. The ultrasonic 2D-array transducer was made of 64 piezoelectric elements and the measurement is automated by an advanced ultrasonic system. An automated time-of-flight extraction algorithm was used based on peak detection of ultrasonic signals. The elastic constants of the CFRP plates were calculated based on the Christoffel equation. This method was validated by ultrasonic through-transmission method by using two discrete ultrasonic transducers. Complete elastic constant matrix measurements for unidirectional and quasi-isotropic CFRP plates were demonstrated using the proposed method. This method has higher positional accuracy, faster testing speed, and better consistency compared to through-transmission method. This work can also be applied for in-situ structural health monitoring of elastic properties changes of materials and structures.
1 September 2018 in NDT & E International
MMMeysam Sharifzadeh Mirshekarloo
Meysam Sharifzadeh Mirshekarloo
8 August 2024 in Composites Science and Technology