7 October 2023 in International Journal of Mechanical Sciences
23 March 2022 in Composites Science and Technology
16 April 2024 in Journal of Power Sources
7 February 2022 in IEEE Sensors Journal
The use of carbon fiber reinforced polymer (CFRP) composites is gaining popularity in various industries. Due to its anisotropic nature, the characterization of the mechanical properties of CFRP is challenging. The current practices for determination of the elastic properties of CFRP materials are through destructive testing methods, which is not feasible in many in-situ scenarios. This paper presents an in-situ and non-destructive method to characterize elastic properties of CFRP plates by using an ultrasonic 2D-array transducer. The ultrasonic 2D-array transducer was made of 64 piezoelectric elements and the measurement is automated by an advanced ultrasonic system. An automated time-of-flight extraction algorithm was used based on peak detection of ultrasonic signals. The elastic constants of the CFRP plates were calculated based on the Christoffel equation. This method was validated by ultrasonic through-transmission method by using two discrete ultrasonic transducers. Complete elastic constant matrix measurements for unidirectional and quasi-isotropic CFRP plates were demonstrated using the proposed method. This method has higher positional accuracy, faster testing speed, and better consistency compared to through-transmission method. This work can also be applied for in-situ structural health monitoring of elastic properties changes of materials and structures.
8 August 2024 in Composites Science and Technology
22 May 2025 in Journal of Applied Physics
Vibration control in engineering structures is a critical and common challenge. Acoustic metasurfaces offer a novel approach for vibration control by manipulating acoustic wave propagation. However, conventional designs for controlling wave propagation often require material removal, such as holes or slots, which compromise structural integrity and complicate fabrication. This study introduces a surface-mounted curved elastic metasurface that effectively suppresses Lamb wave propagation without modifying the base material, thereby preserving its mechanical strength. By modulating the transmission path and adjusting the phase of Lamb wave transmission, this design achieves significant vibration amplitude reduction through destructive interferences. Structural dimension optimization enhances wave suppression across thin plates and curved beams, providing broadband suppression across multiple frequency bands. This metasurface design holds broad potential for wave manipulation and advanced acoustic device development.