1 January 2020 in ChemChemTech
BSBolatzhan E. Serikbayev
The aim of the work is physicochemical studies of chemical and mineralogical composition of the slag from the production of low-carbon ferrochrome proposed to use as a component of heat-resistant binder. As a result of studies, it was found that the main crystal phase in the slag is calcium orthosilicate in the form of gamma-Ca2SiO4 modification, which is also partially in the form of alpha-Ca2SiO4, and magnesian silicates in the form of forsterite Mg2SiO4. The main properties of the slag such as density, specific surface, dispersiveness, refractoriness are determined by the properties of the dominant mineral-calcium orthosilicate. Under conditions of slow cooling of the slag melt, the main mineral in the slag composition, i.e. calcium orthosilicate beta-Ca2SiO4 passes into gamma-Ca2SiO4 modification with increase in the volume of crystal lattice by similar to 12%, which leads to self-destruction and transition of the slag to a dust state. The results of studies of the specific surface, determination of the average particle size, the results of sieve analysis showed that the slag from the production of low-carbon ferrochrome is a finely dispersed gray powder with the following characteristics: the specific surface is 2955 cm(2)/g, the average particle size is 6.8 mu m, the true density is 3.01 g/cm(3), the bulk density is 739 kg/m(3). When using the finely dispersed slag from the production of low-carbon ferrochrome as a component of composite binders, the energy-consuming process of its fine grinding can be eliminated. Currently, the slag from the production of low-carbon ferrochrome is practically not used as a secondary mineral raw material. However, the physicochemical properties of the minerals making up the slag allow to recommend it as a component for the manufacture of heat-resistant materials. The results of physical and chemical studies can be used to develop effective technologies for integrated processing of low-carbon ferrochrome slags.
15 October 2019 in SERIES CHEMISTRY AND TECHNOLOGY
1 May 2015 in Theoretical Foundations of Chemical Engineering
The paper considers issues of mechanical activation of phosphate fines, low-grade by its chemical composition and off-grade by its grain fineness mineral raw material. Results of the research showed...
15 December 2020 in SERIES CHEMISTRY AND TECHNOLOGY
The research results of physicochemical and physicotechnical properties of slag wastes from ferrochrome production as raw materials for heat-resistant materials are presented. Chemical and mineralogical composition of slag from high-carbon ferrochrome production and slag from low-carbon ferrochrome production, as well as their constituent main crystalline phases, represented by magnesium and calcium aluminosilicates of complex composition, have been determined by physicochemical research methods. According to X-ray phase analysis, the slag from the high-carbon ferrochrome production is represented mainly by forsterite Mg2SiO4, spinel MgAl2O4, partially amorphous glass phase and admixture of calcium orthosilicate Ca2SiO4. In the slag from the low-carbon ferrochrome production, the main crystalline phase is calcium orthosilicate γ-Ca2SiO4, as well as magnesium orthosilicate forsterite Mg2SiО4. The research results of specific surface area, average particle size determination and sieve analysis have shown that the slag from the low-carbon ferrochrome production is a finely dispersed gray powder with the following characteristics: the specific surface area – 295 m2 /kg, the average particle size – 6.8 μm, the true density – 3.01 g/cm3 , the bulk density – 739 kg/m3 . The research of the physicochemical and physicotechnical properties has established that in terms of chemical, mineralogical composition and refractoriness indices, the slags from the high-carbon ferrochrome and low-carbon ferrochrome productions can be valuable raw materials for heat-resistant materials.