23 December 2020 in IEEE Access
Radio access technologies (RATs) are a key topic in railways, enabling them a better service rendering in terms of shorter headways between trains, higher safety levels and higher customer satisfaction. Very often, these railway RATs need a lot of time to be developed, tested and put into service, which implies a lack of efficiency and bottlenecks in the evolution of railway systems. To solve this situation, an emulation platform that considers both the physical layer and the network (this is, able to emulate the end-to-end chain) is envisaged in the EmulRadio4Rail project. Therefore, the physical layer of many railway scenarios must be emulated, which is a remarkable challenge because railways are very diverse. We see Tapped-Delay Lines (TDL) models as the most efficient way for emulation with the available hardware. In the literature, there are many TDL-based channel models for all the scenarios we considered but one: tunnels. Therefore, in order to fill this gap, we develop a novel TDL model for railway tunnels, considering the impact of the rolling stock (both high-speed railway (HSR) and subway trains). The proposed model allows the full characterization of this scenario in terms of power-delay-profile (PDP), Doppler spectrum and fading characteristics.
30 October 2024 in IEEE Transactions on Vehicular Technology
The next-generation Internet of Vehicle (IoV) with V2X as the core is the foundation for safe and reliable autonomous driving. As one of the crucial components of V2X, V2I requires roadside units (RSUs) to be equipped with both sensing and communication capabilities. For this reason, integrated sensing and communication (ISAC) is considered a promising technology that will be applied in RSUs. However, when vehicle users (VUs) move to the edge of RSU coverage, ISAC beams from different RSUs may collide and cause inter-region interference. We propose an ISAC-based beam tracking scheme for the multi-RSU V2I scenario based on coordinated multi-point (CoMP) to address this issue. The beam tracking scheme can be divided into two parts. The first part is the beam tracking approach including the method of predicting and estimating state parameters based on the unscented Kalman filter (UKF) and the method of managing VU sets based on predicted state parameters. The second part is the multi-RSU joint resource allocation against inter-region interference based on predicted VU sets to improve the tracking accuracy of VUs. Specifically, an optimization problem to minimize the sum of the posterior Crámer-Rao bound (PCRB) of all VUs is considered. By employing the alternative optimization (AO) algorithm, appropriate wireless resources can be allocated to different VUs, and then a bandwidth index method based on predicted state parameters to avoid spectral conflicts is designed. Finally, we analyze the performance of various schemes through numerical simulations. Our proposed scheme using UKF based on CoMP is outstanding in improving SINR for VUs while maintaining high tracking accuracy compared with other schemes.
24 April 2025 in IEEE Transactions on Vehicular Technology
Industrial control scenarios impose strict requirements on wireless communication networks, especially deterministic delay. Due to limited communication resources and time-varying wireless channels, transmission delay varies randomly, resulting in high jitter. To ensure deterministic delay, we model the jitter as the variance of transmission delay and formulate delay variance minimization problems by jointly optimizing transmission power and blocklength in the finite blocklength regime. The challenge of this research is that the delay variance formula couples multiple time slots together. Two typical communication scenarios, namely, the transmit power-limited case and the transmit energy-limited case, are considered. In the power-limited scenario, we consider the maximum transmit power constraint and propose a variance recursive formula-based scheme to decouple the variance minimization problem. As for the second case, an average energy constraint is additionally considered, and a Lyapunov-based scheme is proposed. We further propose low-complexity iterative algorithms to address the above non-convex problems. Numerical results demonstrate the superiority of our proposed schemes over the state-of-the-art ones in terms of reducing jitter. Furthermore, we reveal the trade-off between the average delay and delay variance, highlighting the necessity for tailored system design and reasonable resource allocation.
8 September 2025 in IEEE Transactions on Vehicular Technology
As a promising technology in the B5G and 6 G era, integrated sensing and communication (ISAC) can simultaneously support high-quality sensing and communication, and there is a growing consensus to introduce this technology into vehicle-to-everything (V2X) networks. Meanwhile, deploying cloud radio access networks (C-RANs) enables cooperation among multiple base stations (BSs), further bringing about cooperative gains. However, the mechanism of ISAC-based multi-BS cooperative tracking is still unclear, and the moving VUs also pose significant challenges for multi-BS cooperative dynamic interference management. Driven by the above issues, this paper investigates a cooperative ISAC (Co-ISAC) tracking system that supports rate-splitting multiple access (RSMA) transmission strategies for complex vehicle-to-infrastructure (V2I) scenarios. First, we consider VUs with complex trajectories and design the system workflow based on the interacting multiple model unscented Kalman filter (IMM-UKF) framework and the theory of weighted least squares (WLS). Next, we investigate multi-BS joint transmission strategies based on single-carrier RSMA (SC-RSMA) and multiple-carrier RSMA (MC-RSMA). The latter is designed for more challenging wireless environments with a small number of antennas and adds to the former a grouping method based on graph theory and an inter-group power allocation method based on predicted state vectors suitable for dynamic scenarios. Finally, numerical results demonstrate that the RSMA-enabled Co-ISAC tracking system performs better than other baseline schemes in complex V2I scenarios.
15 December 2025 in IEEE Transactions on Vehicular Technology
Integrated sensing and backscatter communication (ISABC) systems are poised to play a significant role in the next-generation Internet of Vehicles (IoV). This paper investigates the Pareto boundary of an ISABC system equipped with semi-active tags (SATs) for ultra-reliable and low-latency communication (URLLC) in vehicle-to-infrastructure (V2I) scenarios. Specifically, we first derive the communication error probability and sensing error probability, which are closely related to vehicle users (VUs), based on the near-field (NF) channel modeling method and finite blocklength (FBL) theory, respectively. Subsequently, we formulate a joint resource allocation problem that trades off the total power and the total transmission delay of the system. To tackle this multi-objective problem, we employ a Pareto optimization framework to decompose the original problem into two single-objective problems with constrained methods, and rigorously prove that each single-objective problem can be transformed into a simple linear programming problem. By adjusting the constraints, the complete Pareto boundary can be obtained using the block coordinate descent (BCD) algorithm. Finally, numerical simulations validate the correctness of our analysis and provide unique insights for the practical deployment of ISABC systems in future V2I scenarios.
1 January 2026 in IEEE Internet of Things Journal