Byung-Chul Woo

Byung-Chul Woo

Auto-generated profile, based on publicly available information

Byung-Chul Woo

Electric Machines and Drives Research Center, Korea Electrotechnology Research Institue, Changwon 51543, Korea

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2014 in Sensors
Verified
Journal Article
Open access
PDF file
DHDo-Kwan Hong
Do-Kwan Hong
DJDae-Suk Joo
Dae-Suk Joo
BWByung-Chul Woo
Byung-Chul Woo
DKDae-Hyun Koo
Dae-Hyun Koo
CAChan-Woo Ahn
Chan-Woo Ahn
The objective of the present study was to deal with the rotordynamics of the rotor of an ultra-high speed PM type synchronous motor-generator for a 500 W rated micro gas turbine generator. This paper introduces dynamic analysis, and experiments on the motor-generator. The focus is placed on an analytical approach considering the mechanical dynamic problems. It is essential to deal with dynamic stability at ultra-high speeds. Unbalance response analysis is performed by calculating the unbalance with and without balancing using a balancing machine. Critical speed analysis is performed to determine the operating speed with sufficient separation margin. The unbalance response analysis is compared with the experimental results considering the balancing grade (ISO 1940-1) and predicted vibration displacement with and without balancing. Based on these results, a high-speed motor-generator was successfully developed.

9 July 2010 in Sensors
Verified
Journal Article
Open access
PDF file
DHDo-Kwan Hong
Do-Kwan Hong
BWByung-Chul Woo
Byung-Chul Woo
DKDae-Hyun Koo
Dae-Hyun Koo
KLKi-Chang Lee
Ki-Chang Lee
This paper presents an optimum design of a lightweight vehicle levitation electromagnet, which also provides a passive guide force in a magnetic levitation system for contactless delivery applications. The split alignment of C-shaped electromagnets about C-shaped rails has a bad effect on the lateral deviation force, therefore, no-split positioning of electromagnets is better for lateral performance. This is verified by simulations and experiments. This paper presents a statistically optimized design with a high number of the design variables to reduce the weight of the electromagnet under the constraint of normal force using response surface methodology (RSM) and the kriging interpolation method. 2D and 3D magnetostatic analysis of the electromagnet are performed using ANSYS. The most effective design variables are extracted by a Pareto chart. The most desirable set is determined and the influence of each design variable on the objective function can be obtained. The generalized reduced gradient (GRG) algorithm is adopted in the kriging model. This paper’s procedure is validated by a comparison between experimental and calculation results, which shows that the predicted performance of the electromagnet designed by RSM is in good agreement with the simulation results.

1 September 2013 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
SCShi-Uk Chung
Shi-Uk Chung
Yon-Do ChunYon-Do Chun
Yon-Do Chun
BWByung-Chul Woo
Byung-Chul Woo
DHDo-Kwan Hong
Do-Kwan Hong
JLJi-Young Lee
Ji-Young Lee

1 September 2012 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
JXJia Xie
Jia Xie
DKDo-Hyun Kang
Do-Hyun Kang
BWByung-Chul Woo
Byung-Chul Woo
JLJi-young Lee
Ji-young Lee
ZSZheng-Hui Sha
Zheng-Hui Sha
Shengdun ZhaoShengdun Zhao
Shengdun Zhao

17 December 2019 in Energies
Verified
Journal Article
Open access
PDF file
PLPhuong Thi Luu
Phuong Thi Luu
JLJi-young Lee
Ji-young Lee
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
BWByung-Chul Woo
Byung-Chul Woo
This paper presents the design and analysis of a permanent magnet synchronous motor (PMSM) considering the axial asymmetric PM overhang for a smart actuator (SA) application such as an isokinetic exercise machine. This structure helps take advantage of the motor space effectively and makes the system small in size and light in weight. However, two drawbacks related to the performance of motor occur when the axial asymmetric PM overhang is used: (1) an axial attractive force (AAF) is created, which can produce motor noise and vibration; (2) the torque of motor is reduced compared with the symmetric PM overhang model. We used five steps to solve these problems. Firstly, the AAF according to the variation in axial position of the rotor to the stator was calculated and analyzed. Secondly, the torque was calculated under the same conditions to confirm that the system requirements were satisfied. The three-dimensional finite element analysis was used to determine the AAF and torque. Thirdly, the appropriate axial position of the rotor to the stator was suggested considering the analysis results and space inside the housing. Next, the commercial bearing type was chosen so that the total force acting on the bearing was below the bearing load limit to ensure motor stability. Finally, a prototype model was made and tested to confirm the accuracy of the analytical results. Through this study, by using the axial asymmetric PM overhang, the total length of SA was reduced by 5mm and the performance of motor was guaranteed.

20 July 2012 in Transactions of the Korean Society for Noise and Vibration Engineering
Verified
Journal Article
Closed access
DHDo-Kwan Hong
Do-Kwan Hong
SJSeung-Wook Jung
Seung-Wook Jung
BWByung-Chul Woo
Byung-Chul Woo
DKDae-Hyun Koo
Dae-Hyun Koo
CAChan-Woo Ahn
Chan-Woo Ahn