1 December 2021 in Structures
17 January 2023 in Structures
28 August 2023 in Thin-Walled Structures
17 July 2023 in Periodica Polytechnica Civil Engineering
The interaction behavior between local and global buckling modes in high-strength steel box-section columns has received limited research attention. Currently, there is a lack of a validated equivalent geometric imperfection that can be effectively employed in nonlinear plastic analysis to estimate the interaction buckling resistance. This research aims to find equivalent geometric imperfections that can be used in geometrical and materially nonlinear analysis using imperfections (GMNIA) to estimate the interaction buckling resistance of square welded box-section columns made of high-strength steel. It extends prior investigations by the authors on equivalent imperfections for normal-strength steel welded box-sections. A developed and validated numerical model is used to perform parametric studies to estimate the accurate buckling capacity using previously developed and verified combinations of imperfections and residual stresses. The accurate buckling capacities are used to calibrate equivalent local and global imperfection combinations that can be used in FEM-based design. A reliability assessment study is also performed to check the safety level of the proposed imperfection combinations.
16 May 2024 in Periodica Polytechnica Civil Engineering
The present study focuses on investigating the interaction behavior of local and global buckling resistance of welded box-section columns by using stochastic analysis. Previous studies mainly investigated this failure mode using experimental or numerical investigations but using deterministic approaches. The current research employs Monte Carlo simulations as a robust numerical tool to estimate the interaction buckling resistance. Stochastic variables are defined, encompassing variabilities in geometrical and material properties, as well as local and global imperfections. To facilitate these simulations, a rigorously validated numerical model is employed, utilizing geometrical and materially nonlinear analysis with imperfections (GMNIA). This advanced modeling approach accounts for the complex nonlinearities inherent in the behavior of welded box-section columns. The characteristic resistance derived from the Monte Carlo simulation is compared to 1. test results, 2. analytical buckling resistance according to the Eurocode design approach, and 3. previously proposed deterministic approaches. Within the research program, an improved generalized design formula is developed to estimate the buckling resistance for pure local, global, and interaction buckling modes. The new design equation is compatible with the design rules of the Eurocode and enhances the ease of use of the standard regulations.
9 February 2026 in Periodica Polytechnica Civil Engineering
This study presents an enhanced method for evaluating the buckling resistance of reclaimed steel members by proposing modified local and global buckling formulas that align with the safety provisions of the Eurocode. Standard Eurocode formulas for local and global buckling resistance are insufficient for reclaimed members, as they do not account for the standard-based imperfection magnitudes and residual stress states commonly observed in reclaimed structures. To address this gap, new buckling resistance formulas were developed and calibrated through advanced geometrically and materially nonlinear analysis with imperfections (GMNIA). The reliability of the proposed formulas is evaluated in accordance with Annex D of EN 1990, enabling the derivation of appropriate partial safety factors for both local and global buckling modes. An additional safety factor is introduced to capture the interaction between these modes, ensuring a reliable safety assessment. The current study provides engineers with a practical method for evaluating the buckling capacity of reclaimed steel members, promoting safe and sustainable reuse in structural applications.