1 May 2023 in AIP Advances
To deal with the challenges that the classical Bouc–Wen model fails to precisely characterize amplitude-dependent hysteresis and asymmetric hysteresis, an improved Bouc–Wen model with variable parameters is presented. The proposed model introduces asymmetric terms and parameter functions related to sinusoidal excitation amplitudes into the classical Bouc–Wen model. It has a relatively simple mathematic form and can be easily identified and applied for inverse feedforward compensation in real-time applications. By comparison with the classical Bouc–Wen model and other existing hysteresis models, the superiority of the proposed model has been verified. Furthermore, inverse hysteresis control and hybrid control combining the developed inverse control and proportional-integral feedback control are proposed. Several comparative experiments are conducted on a piezo-actuated micro-scanner. Results demonstrate that inverse control and hybrid control using the improved Bouc–Wen model with variable parameters can achieve better tracking performance and are meaningful in actual trajectory-tracking applications.
21 November 2023 in IEEE/ASME Transactions on Mechatronics
This article presents a novel harmonic atomic force microscopy with tip-sample couplings (TS-HAFM) working in force modulation mode for imaging samples of different mechanical properties. Compared with traditional harmonic atomic force microscopy (T-HAFM), TS-HAFM has better harmonic characteristics and imaging resolution. T-HAFM does not consider the effect of tip-sample couplings on probe vibration; it can only generate harmonics in the free vibration state. However, after the tip touches the sample, the tip-sample coupling shifts the probe frequency and attenuates the probe's harmonic characteristics. TS-HAFM considers the effect of tip-sample couplings on probe vibration and can prevent problems of image resolution reduction and vibration stability degradation caused by harmonic attenuation. We first tested the Young's modulus of the sample and calculated the tip-sample contact's equivalent contact stiffness based on the Johnson–Kendall–Roberts model. The harmonic probe with tip-sample couplings and the traditional harmonic probe were subsequently designed. Then, the two probes were applied to the topography detection of polypropylene spheres covered with PDMS film and cells on PDMS substrates. Experimental results showed that TS-HAFM was up to 2.01 times more sensitive than T-HAFM in detecting samples of different mechanical properties. When detecting soft samples on PDMS substrates, TS-HAFM still has higher imaging clarity. TS-HAFM has emerged as a powerful platform for high resolution imaging of samples with different mechanical properties, while improving resistance to system interference.
1 October 2026 in IEEE Transactions on Industrial Electronics
Image-guided automated positioning of microobjects in dynamic environments is highly needed in robot micro–nano manipulation. In this article, rendering the problem of collision-free microobject nanopositioning problem as a visual servoing problem, an image-guided navigation control scheme based on dense photometric is proposed. Specifically, the finite convergence domain existed in classical dense photometric-based visual servoing is treated as a constraint and uniformly modeled together with obstacle constraints in the navigation process. Subsequently, an online constraint handling unit based on artificial potential fields is developed to generate collision-free poses while consistently constraining the image evolution to remain within the local convergence region. Additionally, an inverse compositional algorithm is adopted to accelerate control computation, thereby enabling real-time performance. Finally, a series of experiments are conducted to verify the performance of the proposed method. Experimental results demonstrate that the method achieves reliable automatic nano-positioning and effective collision avoidance in both static and dynamic obstacle environments, confirming its feasibility and robustness in practical applications.