17 December 2021 in Journal of Mining Institute
Electrochemical cleaning of oil-contaminated soils is a promising area of environmental safety, as it can be easily organized even in locations remote from settlements. For this purpose, a power source and a system of electrodes are necessary as equipment. It is possible to use an electric generator if there are no power supply lines nearby. The material of electrodes affects the features of redox processes, which can affect the energy consumption and the degree of soil cleansing from oil or oil products. Therefore, the correct choice of electrode materials is one of the important tasks in the field of engineering electrochemical methods of purification. Changes in the main parameters (humidity, temperature, degree of acidity) in an oil-contaminated model soil, similar in composition to one of the oil fields, were investigated. Measurements of parameters when using graphite and metal electrodes were carried out at several fixed sections of the interelectrode space depending on the treatment time. The established patterns of parameter changes in the purification of oil-contaminated soils allow us to draw conclusions about the stages of the electrochemical process, its speed, and energy efficiency. The results obtained form a basis for designing industrial facilities for soil treatment.
1 September 2020 in Doklady Chemistry
The production of soda ash by the Solvay method is accompanied by the formation of wastewater, much of which is the distiller liquid containing up to 100 g/L calcium chloride and up to 50 g/L sodium chloride. A highly efficient electrochemical method was proposed to treat the distiller liquid to form calcium hydroxide, sodium hydroxide, and hydrochloric acid. The proposed process consists of two stages. At the first stage, the distiller liquid is treated with alkali to produce calcium hydroxide and a filtrate containing sodium chloride. At the second stage, the filtrate is processed in a membrane electrolyzer to obtain solutions of sodium hydroxide and hydrochloric acid. It was shown that the process of treating the distiller liquid with alkali should be carried out at a CaCl2 : NaOH molar ratio of 1 : 1.25. The processing of the filtrate in the membrane electrolyzer makes it possible to obtain sodium hydroxide at a concentration of up to 4320 g/L and hydrochloric acid at a concentration of 148 g/L.
31 December 2023 in Nanotechnologies in Construction: A Scientific Internet-Journal
1 January 2020 in Doklady Rossijskoj akademii nauk. Himiâ, nauki o materialah.
1 January 2020 in Nanotechnologies in Construction: A Scientific Internet-Journal
Introduction. To use natural sources in rational way,plantsof continuous cooling of closed systems of recycling water supplyare used. The paper presentsdesigns of small-sized devices for recycling water cooling which are energy resource effective due to twisted motion of air flow, moving countercurrent to the cooled water. Heat and mass transfer is a nanotechnological process that occurs at the intermolecular level. Methods and materials. Countercurrent mini cooling towers are widely used in all industries, but there are some disadvantages, the main of which is the insufficient interaction time of the moving phases. Screw motion of air flow is created by the tangential supply of cooling air in the bottom part of cylindrical small-sized cooling tower. The rate of rotary motion decreases as air flow moves up in cooling towers, and vertical parameter of the rate - increases. Such scheme of the air flow motionmakes it possible to decrease average vertical parameter of the rate and to increase phases contact time. Laboratory research. To determine the technological and hydroaerothermal characteristics, as well as to estimate the efficiency of cooling recycled water, and to carry out mass-heat exchange at the intermolecular stagean experimental facility of small-sized cooling tower with twisted air flow has been developed. Conclusions. In accordance with the exponential law it is shown that the rotational component decreases at increasing height, and in accordance with the power law the vertical component increases component with the exponent similar to 1,79. It is determined that moisture content xand air temperature t(v) in the volume of the height of the sprinkler varies according to a power law, in particular for a screw cooling tower proportionally x similar to h(0,83), t(B) similar to h(1,25). It was determined that the coefficients of mass transfer and heat transfer beta(xy) of a mini cooling tower with twisted air flow at the intermolecular level with equal irrigation densities are 20% higher than the coefficients of a mini cooling tower with counter-current flow. Also it has been determined experimentally a dependence of aerodynamics resistance coefficient of the twisted irrigator of the cooling tower on criterium Reforair flow, and it was determined that it decreases like Re-K2 as the exponent K-2 varies in the range 0.114 divided by 0.193 depending on the irrigation density.