The linear velocity at the tip of large wind turbine blades can reach 100 m/s, generating static electricity through friction with airborne particles. However, the accumulation characteristics of precipitation static on the blade surface and its impact on the lightning attachment characteristics are rarely reported. The authors constructed a platform for measuring charges on rotating wind turbine blades and employed the electrostatic probe method to obtain the accumulation characteristics of surface charges under different environmental conditions. The experimental results show that positive charges accumulate on the blade surfaces, peaking at 0.69 μC/m 2 under experimental conditions. The charge density is positively correlated with airborne particle concentration and blade rotation speed, while it is negatively correlated with relative air humidity. Additionally, the authors developed a model of the electric field distribution on wind turbine blades considering the effects of precipitation static. Simulation results indicate that the electrostatic field induced by precipitation static weakens the field strength in the vicinity of receptors, reaching a minimum of only 38% of the original strength, thereby increasing the probability of lightning protection failure. The findings provide an effective supplement to the lightning attachment mechanism of rotating wind turbine blades.
26 August 2025 in International Journal of Circuit Theory and Applications
Lightning strikes have posed a severe threat to the operational safety of wind turbines. As an additional lightning-protection measure, metal meshes have been deployed on a number of turbines. However, under high-amplitude lightning currents, the mesh undergoes erosion, potentially compromising its lightning-protection effectiveness. Currently, blade-mounted meshes directly follow aerospace mesh standards, and the relationship between structural parameters and erosion mass on curved blade geometries is seldom reported. Therefore, This paper develops a parametric grid structure-based lighting strike simulation model for wind turbine blade metal mesh. The model analyzes the influence weights of mesh thickness, wire width, and grid size on the ablation mass of the metal mesh. The validity of the simulation model was verified through A+C combined lightning current ablation tests. A multivariate nonlinear regression equation for the ablation mass of the metal mesh was established, providing a quantitative method to evaluate the lightning protection capability of metal meshes with different structural parameters. The results show that under a density of 800 g/m3, the test group’s metal mesh had an ablation mass of 800 mg after exposure to the combined waveform, while the calculated ablation mass using the regression equation was 748 mg, yielding an error of 6.5%. The proposed equation provides a method to quantify the lightning protection capability of metal meshes with varying grid structural parameters.
5 March 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
This study investigates the effects of high-energy electron beam irradiation on fumed silica fillers and the subsequent impact on the properties of synthesized silicone rubber. A systematic examination of the physical and electrical properties of the modified fumed silica and silicone rubber materials is conducted, and the underlying mechanisms behind the irradiated fumed silica’s influence on the silicone rubber are analyzed using first principles calculations. The findings reveal that as the irradiation dose increases, more defect structures emerge, and the defect center transitions from a dimer configuration to a puckered configuration. First principles calculations confirm that this defect center alteration leads to reduced surface energy. Fumed silica containing a higher number of defect structures results in improved mechanical properties and decreased dielectric properties for the silicone rubber material. These outcomes primarily stem from the increased presence of oxygen vacancies in the irradiated fumed silica, which correlates with reduced surface energy and energy band gap in the first principles calculations. This research is essential for understanding the microscopic changes in fumed silica as a filler under irradiation and the mechanism of its effect on silicone rubber, ultimately providing guidance for enhancing the functionality of silicone rubber materials.
Wind turbines often suffer from lightning strikes, iceing and other disasters. The installation of an electrothermal ice-melting device on the blade can effectively remove icing, but it will increase the risk of lightning strikes on the blade. In order to study the change of lighting attachment manner and the reliability of the existing standard lightning protection device after the blade is retrofitted with ice-melting device. This paper designs a 1:30 scaled-down rotatable 3WM ice-melting wind turbine blade for long gap lightning discharge test. Comparing the interception efficiency of the lightning receptors before and after the installation of the ice-melting device on the blade, the results show that when the lightning leader develops on the windward side of the blade, the ice-melting blade has the phenomenon of lightning receptor failure, lightning strike at the junction of the ice-melting device and the blade body. In the most serious case, the protection efficiency of the lightning receptor is only 55%. The ice-melting device ‘ shields ’ some of the lightning receptor, and the charge around the blade is distributed in an arc shape after the blade rotates, so that the ice-melting device is broken down at a lower voltage. Through the lightning strike probability model of ice-melting blade, it is found that there is a great risk of lightning at the junction of ice-melting device and blade body. The results reveal the lightning attachment manner of the ice-melting blade and further guide its lightning protection design.