In this Letter, synchronization of micromechanical oscillators with a frequency ratio of 3:1 is reported. Two electrically coupled piezoresistive micromechanical oscillators are built for the study, and their oscillation frequencies are tuned via the Joule heating effect to find out the synchronization region. Experimental results show that the larger coupling strength or bias driving voltage is applied and a wider synchronization region is obtained. Interestingly, however, the oscillator's frequency tunability is dramatically reduced from –809.1 Hz/V to –23.1 Hz/V when synchronization is reached. A nearly 10-fold improvement of frequency stability at 1 s is observed from one of the synchronized oscillators, showing a comparable performance of the other. The stable high order synchronization of micromechanical oscillators is helpful to design high performance resonant sensors with a better frequency resolution and a larger scale factor.
Phase feedback is commonly utilized to set up a MEMS oscillator. In most studies, the phase delay is fixed on π/2 for a maximum oscillation amplitude. In this letter, we study the dynamics of synchronization in a nonlinear micromechanical oscillator operating on different phase delays. The analytical and experimental results show that the synchronization region shifts and the size of this region varies depending on the phase delay. The frequency stability of the self-sustained oscillator holds the best in the case of phase delay equal to π/2 and can be further improved to the same level after synchronization. Our work reveals the effects of phase delay on synchronization and presents an easy-to-implement strategy for tuning the synchronization by controlling the phase delay of the oscillation feedback circuit in a nonlinear micromechanical oscillator.
Synchronization phenomenon first discovered in Huygens’ clock shows that the rhythms of oscillating objects can be adjusted via an interaction. Here we show that the frequency stability of a piezoresistive micromechanical oscillator can be enhanced via synchronization. The micromechanical clamped-clamped beam oscillator is built up using the electrostatic driving and piezoresistive sensing technique and the synchronization phenomenon is observed after coupling it to an external oscillator. An enhancement of frequency stability is obtained in the synchronization state. The influences of the synchronizing perturbation intensity and frequency detuning applied on the oscillator are studied experimentally. A theoretical analysis of phase noise leads to an analytical formula for predicting Allan deviation of the frequency output of the piezoresistive oscillator, which successfully explains the experimental observations and the mechanism of frequency stability enhancement via synchronization.
A graphene–silicon Schottky junction (GSJ), which has potentials of large-scale manufacturing and integration, can bring new opportunities to Schottky solar cells for photovoltaic (PV) power conversion. However, the essential power conversion limitation for these devices lies in a small open-circuit voltage ( ), which depends on the Schottky barrier height. In this study, we introduce an electromechanical method based on a flexoelectric effect to enhance the PV efficiency in GSJ. By atomic force microscope (AFM) tip-based indentation and in situ current measurement, the current–voltage (I–V) responses under a flexoelectric strain gradient are obtained. The is observed to increase for up to 20%, leading to an evident improvement of the power conversion efficiency. Our studies suggest that the strain gradient may offer unprecedented opportunities for the development of GSJ-based flexo-photovoltaic applications.
11 December 2023 in Calculus of Variations and Partial Differential Equations