In this Letter, synchronization of micromechanical oscillators with a frequency ratio of 3:1 is reported. Two electrically coupled piezoresistive micromechanical oscillators are built for the study, and their oscillation frequencies are tuned via the Joule heating effect to find out the synchronization region. Experimental results show that the larger coupling strength or bias driving voltage is applied and a wider synchronization region is obtained. Interestingly, however, the oscillator's frequency tunability is dramatically reduced from –809.1 Hz/V to –23.1 Hz/V when synchronization is reached. A nearly 10-fold improvement of frequency stability at 1 s is observed from one of the synchronized oscillators, showing a comparable performance of the other. The stable high order synchronization of micromechanical oscillators is helpful to design high performance resonant sensors with a better frequency resolution and a larger scale factor.
15 November 2024 in International Journal of Mechanical Sciences
Since the discovery of the electron, the accurate detection of electrical charges has been a dream of the scientific community. Owing to some remarkable advantages, micro/nanoelectromechanical system-based resonators have been used to design electrometers with excellent sensitivity and resolution. Here, we demonstrate a novel ultrasensitive charge detection method utilizing nonlinear coupling in two micromechanical resonators. We achieve single-electron charge detection with a high resolution up to 0.197 ± 0.056 $${\mathrm{e}}/\sqrt {{\mathrm{Hz}}}$$ at room temperature. Our findings provide a simple strategy for measuring electron charges with extreme accuracy.
Frequency comb in microelectromechanical systems has attracted many concerns, which is expected to realize great achievements analogous with the optical frequency comb. Previous frequency combs are generated by mode coupling in a single micro-resonator. To pursuit more excellent tunability and robustness, it is impending to create a frequency comb through another way, i.e., coupled but relatively independent micro-resonators. In this work, a frequency comb in 1:3 internal resonance region of an electrostatically coupled microsystem is reported. We demonstrate the occurrence conditions and its influencing factors of the frequency comb. A dynamical explanation, which has good agreement with the experimental results, is presented to further reveal its intrinsic mechanism. Our finding provides a controllable method to produce a frequency comb that is beneficial to potential applications, such as signal processing and sensing sensitivity enhancement.
MEMS resonators exhibit rich dynamic behaviors under the internal resonance regime. In this work, we present a novel MEMS bifurcation sensor that exploits frequency unlocking due to a 1:3 internal resonance between two electrostatically coupled micro-resonators. The proposed detection mechanism allows the sensor to operate in binary (digital) and analog modes, depending on whether the sensor merely detects a significant jump event in the peak frequency upon unlocking or measures the shift in the peak frequency after unlocking and uses it in conjunction with a calibration curve to estimate the corresponding change in stimulus. We validate the success of this sensor paradigm by experimentally demonstrating charge detection. High charge resolutions are achieved in binary mode, up to 0.137 fC, and in analog mode, up to 0.01 fC. The proposed binary sensor enables extraordinarily high detection resolutions due to the excellent frequency stability under internal resonance and the high signal-to-noise ratio of the shift in peak frequency. Our findings offer new opportunities for high-performance ultrasensitive sensors.