The fabrication of an ultra-compact, highly sensitive anemometer on a hundred-micron fiber end face poses a formidable challenge. Traditional thermal anemometers often sacrifice low power consumption and temperature control for enhanced range and sensitivity. To overcome these limitations, we introduce a microtip-based thermal anemometer seamlessly integrated with optical fiber ends. First, a SiO2 microtip was prepared by the discharge melting tapering technique. Subsequently, a polymer microtip doped with photothermal material was further grown on the SiO2 microtip by photoinduced polymerization. This dual-layer microtip structure forms a cascade of Fabry-Pérot interferometer (FPI) and increases the sensitivity by approximately 10.8 times based on vernier effect. Zr-PDI is a metal-organic framework (MOF) with a photothermal efficiency of 52.3%, which can reach 113°C under 1.96mW (808 nm) laser irradiation. Experimental results demonstrate that the sensor achieves the wind speed detection range of 0–20 m/s, with a maximum sensitivity of 7.36 nm/(m/s) in the range of 0–3 m/s. This low-power, ultra-compact sensor features highly sensitive, wide-range wind speed measurement capabilities.
23 January 2025 in Journal of Lightwave Technology
In this paper, a fiber optic tryptophan enantiomers chiral sensor based on metal-organic frameworks (MOFs) is proposed. Two kinds of MOFs with different chiral microenvironments were coated on the surface of U-shaped sensor and helical long-period grating (HLPG), and the two sensors achieved specific identification and quantitative sensing of L-Trpptophan (L-Trp) and D-Trpptophan (D-Trp) in racemic mixture solution. The two MOFs have different adsorption effects on L-Trp and D-Trp, which makes the two sensors have different sensitivity. The results showed that the sensitivity of the sensor was -24.34 nm/μM (experimental limit of detection (LOD) = 2.5 nM) for L-Trp and 11.579 nm/μM (experimental LOD = 5.2 nM) for D-Trp. The fiber Bragg grating (FBG) is used as a temperature sensor to compensate the temperature of the sensing system. Chiral detection of tryptophan enantiomers at different temperatures can be achieved by constructing a three parameters matrix. Research has shown that the sensor has a satisfactory application prospect.
Indole spiropyran is a kind of ultraviolet (UV) sensitive material with excellent properties. In this paper, a photonic crystal fiber (PCF) sensor with built-in nano-silver layer is proposed to generate dual sensing of Mach-Zehnder interference (MZI) and surface plasmon resonance (SPR) for simultaneous measurement of UV radiation and temperature. We use carbon dioxide laser etching to form holes on the side of PCF, and use silver mirror reaction to deposit nano-silver film in the internal holes of PCF, and use selective filling method to fill the ethanol dispersion of indole spiropyran into the air holes of PCF as UV and temperature sensitive materials. It has been verified that the sensor’s sensitivity to UV irradiation intensity can reach 0.8378 nm/mW/cm2, and the sensitivity of temperature sensing can reach -0.6498 nm/oC. Based on two-parameter matrix demodulation, the simultaneous detection error of UV and sensor temperature of the sensor is less than 2%. The sensor has the advantages of compact size, straightforward, manufacture, and high sensitivity, and exhibits potential application prospects in the field of UV radiation detection.