The fabrication of an ultra-compact, highly sensitive anemometer on a hundred-micron fiber end face poses a formidable challenge. Traditional thermal anemometers often sacrifice low power consumption and temperature control for enhanced range and sensitivity. To overcome these limitations, we introduce a microtip-based thermal anemometer seamlessly integrated with optical fiber ends. First, a SiO2 microtip was prepared by the discharge melting tapering technique. Subsequently, a polymer microtip doped with photothermal material was further grown on the SiO2 microtip by photoinduced polymerization. This dual-layer microtip structure forms a cascade of Fabry-Pérot interferometer (FPI) and increases the sensitivity by approximately 10.8 times based on vernier effect. Zr-PDI is a metal-organic framework (MOF) with a photothermal efficiency of 52.3%, which can reach 113°C under 1.96mW (808 nm) laser irradiation. Experimental results demonstrate that the sensor achieves the wind speed detection range of 0–20 m/s, with a maximum sensitivity of 7.36 nm/(m/s) in the range of 0–3 m/s. This low-power, ultra-compact sensor features highly sensitive, wide-range wind speed measurement capabilities.
Research on fiber-based ion sensing technologies has been mainly focused on static aqueous environments. This study explores fiber-optic sensing of cesium ions (Cs+) in temperature-flow coupled field for the first time. The sensor integrates three sensing channels: a fiber Bragg grating (FBG) encapsulated inside the optical fiber for temperature monitoring, a Fabry-Pérot interferometer (FPI) micro-tip structure fabricated on the fiber end face that enables sensitive detection of dynamic flow velocity variations, and a localized surface plasmon resonance (LSPR) D-shaped optical fiber functionalized with an Au/Fe2O3/PB nanocomposite film for specific recognition of Cs+. By constructing a three-dimensional fitted response map, the sensing sensitivity of the fiber-optic cesium ion sensor under different flow velocities and temperatures can be directly obtained. The results demonstrate that the limit of detection for Cs+ is 0.2nM~0.03nM within a temperature range of 30°C~80°C and a flow velocity range of 0 mm/s~1 mm/s. This sensor enables highly sensitive detection of Cs+ in coupled fields and provides a new approach for ion detection in complex environments.