Lukasz Butkowski

Lukasz Butkowski

Auto-generated profile, based on publicly available information

Lukasz Butkowski

Deutsches Elektronen-Synchrotron, Hamburg 22607, Germany

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2021 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
ABAndrea Bellandi
Andrea Bellandi
LBLukasz Butkowski
Lukasz Butkowski
BDBurak Dursun
Burak Dursun
AEAnnika Eichler
Annika Eichler
CGCagil Gumus
Cagil Gumus
JBJulien Branlard
Julien Branlard
Superconducting cavities are responsible for beam acceleration in superconducting linear accelerators. Challenging cavity control specifications are necessary to reduce RF costs and to maximize the availability of the accelerator. Cavity detuning and bandwidth are two critical parameters to monitor when operating particle accelerators. Cavity detuning is strongly related to the power required to generate the desired accelerating gradient. Cavity bandwidth is related to the cavity RF losses. A sudden increase in bandwidth can indicate the presence of a quench or multipacting event. Therefore, calculating these parameters in real-time in the low-level RF system is highly desirable. A real-time estimation of the bandwidth allows a faster response of the machine protection system in case of quench events, whereas the estimation of cavity detuning can be used to drive piezoelectric tuner-based resonance control algorithms. In this article, a new FPGA-based estimation component is presented. Such a component is designed to be used either in continuous wave or pulsed operation mode with loaded quality factors between 106 and 108. Results of this component with FLASH, EuXFEL, CMTB, and ELBE are presented.

27 March 2017 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
RRRadoslaw Rybaniec
Radoslaw Rybaniec
KPKonrad Przygoda
Konrad Przygoda
WCWojciech Cichalewski
Wojciech Cichalewski
VAValeri Ayvazyan
Valeri Ayvazyan
JBJulien Branlard
Julien Branlard
JSJacek Sekutowicz
Jacek Sekutowicz
Modern digital low level radio frequency (RF) control systems used to stabilize the accelerating field in facilities, such as free electron laser in Hamburg or the European X-ray free electron laser, are based on the field programmable gate array (FPGA) technology. Presently, these accelerator facilities are operated with pulsed RF. In the future, these facilities will operate with the continuous wave (CW), which requires significant modifications on the real-time feedbacks realized within the FPGA. For example, higher loaded quality factor of the superconducting RF cavities operated in the CW mode requires sophisticated resonance control methods. However, iterative learning techniques widely used for machines operated in pulsed mode are not applicable for the CW. In addition, the mechanical characteristic of the cavities now have a much more important impact on the choice of the feedback scheme. To overcome the limitations of classical proportional–integral controllers, a novel real-time adaptive feed-forward algorithm is implemented in the FPGA. Also, the high power RF amplifier, which is an inductive output tube (IOT) for CW operation instead of a klystron for the pulsed mode, has a major impact on the design and implementation of the firmware for regulation. In this paper, we report on our successful approach to control the multicavity vector sum with an ultrahigh precision (amplitude error <0.01% rms and phase stability <0.02° rms), using a single IOT source and the individual resonance control through piezoactuators. Performance measurements of the proposed solution were conducted at the cryomodule test bench facility.

4 June 2015 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Open access
DMDariusz Makowski
Dariusz Makowski
AMAleksander Mielczarek
Aleksander Mielczarek
PPPiotr Perek
Piotr Perek
Jan Andrzej NapieralskiJan Andrzej Napieralski
Jan Andrzej Napieralski
LBL. Butkowski
L. Butkowski
BYB. Yang
B. Yang
Linear accelerators, like the Free-electron LASer in Hamburg (FLASH) or the European X-Ray Free Electron Laser (E-XFEL) take advantage of the digital Low Level Radio Frequency (LLRF) system to control the phase and amplitude of an electromagnetic field inside superconducting cavities. The real-time control LLRF system, processing data within a few microseconds, has to fulfil performance requirements and provide comprehensive monitoring and diagnostics. The AMC-based controller (DAMC-TCK7) board was developed as a general purpose high-performance low-latency data processing unit designed according to the PICMG MTCA.4 spec. The module provides the processing power, data memory, communication links, reference clock, trigger and interlock signals that are required in modern LLRF control systems. The module was originally designed as a cavity field stabilizing controller for standing-wave linear accelerators. However, the application of the board is much wider because it is a general purpose data processing module suitable for systems requiring low latency and high-speed digital signal processing. According to authors' knowledge this is the first MTCA.4 module offering 12.5 Gbps links, unified Zone 3 connectivity and advanced Module Management Controller proposed by DESY. The DAMC-TCK7 card was used as a hardware template for the development of the other AMC modules of the XFEL accelerator's LLRF system. This paper discusses the requirements for the digital real-time data processing module, presents the laboratory performance evaluation and verification in Cryo-Module Test Bench (CMTB) at DESY.

16 March 2020 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
ABAndrea Bellandi
Andrea Bellandi
VAValeri Ayvazyan
Valeri Ayvazyan
LBLukasz Butkowski
Lukasz Butkowski
WCWojciech Cichalewski
Wojciech Cichalewski
BDBurak Dursun
Burak Dursun
JBJulien Branlard
Julien Branlard
Vacuum tube amplifiers are the most widespread type of Radio Frequency (RF) sources used to produce high power signals needed for beam acceleration in superconducting cavities. At Deutsches Elektronen-Synchrotron (DESY), megawatt rated klystrons are used to produce millisecond-long RF shots for pulsed operation in particle accelerators. In contrast, inductive output tubes are used to provide a continuous RF signal for Continuous Wave (CW) operation. In both cases, the amplifiers suffer from amplitude dependent nonlinearity between the driving and generated signals. This nonlinearity complicates the setup operations of the Low Level RF (LLRF) system and makes it harder to regulate the accelerating field. Therefore a way to linearize the amplifier is highly valuable. This paper covers the design, implementation, and test of an FPGA-based predistortion linearization unit. The first results on the performance of this component in linearizing the amplifiers of running CW and pulsed superconducting accelerators are presented. Such a component uses programmable interpolating Look Up Tables (LUT) that are addressed using the squared value of the requested signal amplitude. This component only adds 64 ns latency to the RF control system without relying on any vendor-dependent FPGA component. Other benefits of using programmable interpolating LUT are low FPGA usage of FPGA resources and flexibility in terms of the type of amplifier to be corrected. The benefits of using this linearizer for klystrons and inductive output tubes are presented and quantified.

31 May 2017 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
KPK. Przygoda
K. Przygoda
RRR. Rybaniec
R. Rybaniec
LBL. Butkowski
L. Butkowski
CGC. Gerth
C. Gerth
PPP. Peier
P. Peier
HSH. Schlarb
H. Schlarb
In this paper, we present an universal solution for radio frequency (RF) and laser cavities regulation, including piezocontrols and drivers based on MicroTCA.4 electronics. The control electronics consists of an Analog to Digital Converter-advanced mezzanine card (AMC) with an analog rear transmission module (RTM) to downmix and measure the RF signals and a low cost AMC-based Field Programmable Gate Array mezzanine card carrier for fast data processing and digital feedback operation connected to an RTM piezodriver. For the RF cavity regulation, the piezodriver includes additional inputs to use piezoelements as active force sensors. The fine tuning of the laser is carried out using a cavity fiber stretcher. The coarse tuning of the supported optics is done using a piezomotor-driven linear stage. Both channels can be operated using digital feedback controllers. First, results from continuous wave operation of the RF field controller and the cavity active resonance control with the piezotuners are demonstrated. The laser lock application performance using both fine and coarse channel feedbacks is shown and briefly discussed.

19 May 2017 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
LBLukasz Butkowski
Lukasz Butkowski
VVVladimir Vogel
Vladimir Vogel
HSHolger Schlarb
Holger Schlarb
JSJerzy Szabatin
Jerzy Szabatin
The driving engine of the superconducting accelerator of the European X-ray free electron laser (XFEL) is a set of 27 radio frequency (RF) stations. Each of the underground RF stations consists of a multibeam horizontal klystron that can provide up to 10 MW of power at 1.3 GHz. Klystrons are sensitive devices with a limited lifetime and a high mean time between failures. In real operation, the lifetime of the tube can be significantly reduced because of failures. The special fast protection klystron lifetime management (KLM) system has been developed to minimize the influence of service conditions on the lifetime of klystrons. The main task of this system is to detect all events which can destroy the tube as quickly as possible, and switch off the driving RF signal or the high voltage. Detection of events is based on a comparison of the value of the real signal obtained at the system output with the value estimated on the basis of a high-power RF amplifier model and input signals. The KLM system has been realized in field-programmable gate array (FPGA) and implemented in XFEL. Implementation is based on the standard low-level RF micro telecommunications computing architecture (MTCA.4 or xTCA). The main part of the paper focuses on an estimation of the klystron model and the implementation of KLM in FPGA. The results of the performance of the KLM system will also be presented.