16 July 2024 in Rock Mechanics and Rock Engineering
24 August 2024 in Tunnelling and Underground Space Technology
12 March 2021 in KSCE Journal of Civil Engineering
The proportion of large-span tunnels in newly-built highway tunnels is getting higher and higher, revealing the stress release law and deformation characteristics of the tunnel at different excavation steps has important guiding significance for the rational design of the supporting structure parameters. In this paper, a typical section of the Laohushan Tunnel was selected to analyze the stress and deformation response of the large-span tunnel excavated with the semi central diaphragm method (SCDM), with the numerical simulation and field monitoring method. The study found that during the excavation of the large-span tunnel with the SCDM, the stress and deformation response characteristics are different from those ordinary tunnels. Influenced by the settlement of the vault, there was a significant outward expansion tendency, and a high degree of stress concentration in the sidewall. In particular, the supporting structure at the sidewall has a deformation characteristic of expanding outward and then converging inward. In this paper, the in-depth analysis of the stress release law and deformation characteristics of the excavation process of large-span tunnels can provide reference for the excavation and support parameter design of similar projects.
6 January 2015 in Korean Journal of Chemical Engineering
22 September 2023 in KSCE Journal of Civil Engineering
In this research, the rockbolt mechanism of a jointed rock mass under uniaxial tension was systematically revealed with a laboratory test and a numerical simulation. It was found that the rockbolt rock mass experienced five stages under uniaxial tension, the densification stage, elastic stage, plastic deformation stage, progressive debonding stage, and complete debonding stage. The stress-strain curve and ultimate tensile strength of a rockbolt rock mass were analyzed by taking the rockbolt spacing and rockbolt angle as variables. It was found that the improvement effect of the reduction of the rockbolt spacing on the ultimate tensile strength was limited. When the rockbolt spacing was reduced to a certain limit, the stress concentration area between adjacent rockbolts was connected and destroyed, resulting in the increase of the rockbolt rock strength becoming smaller, and even having a downward trend. The increase of the rockbolt angle led to the change of the stress mode and failure mode of the whole structure, and the ultimate tensile strength first increased and then decreased. The optimal rockbolt angle was between 60° and 70°. It is worth noting that there was an obvious mechanical occlusion between the thread on the rockbolt surface and the rock mass, resulting in the multi-stage step-down characteristic of the stress-strain curve in the complete debonding stage. The results of this study can provide a reference for the design and construction of similar projects.