7 April 2022 in Optics Express
An all-silicon long-wavelength infrared (LWIR) achromatic metalens based on deep silicon etching is designed in this paper. With a fixed aperture size, the value range of the equivalent optical thickness of the non-dispersive meta-atoms constructing the achromatic metalens determines the minimum f-number. The fabrication characteristic with high aspect ratio of deep silicon etching amplifies the difference value of optical thickness between different meta-atoms by increasing the propagation distance of the propagation mode, which ensures a small f-number to obtain a better imaging resolution. A 280-µm-diameter silicon achromatic metalens with a f-number of 1 and the average focusing efficiency of 27.66% has been designed and simulated to validate the feasibility of this strategy. The simulation results show that the maximum focal length deviation percentage from the target value between the wavelength of 8.6 and 11.4 µm is 1.61%. This achromatic metalens design is expected to play a role in the field of LWIR integrated optical system.
23 June 2014 in Biomacromolecules
1 June 2009 in Journal of Colloid and Interface Science
9 February 2024 in Chemosphere
28 August 2019 in Royal Society Open Science
The decolorization of commercial dyes is still a pertinent issue since these azo dyes are relatively resistant to conventional biological treatment methods. It is well known that polyoxometalates can absorb light in UV–Vis range that delivers electrons to the reducible species resulting in the decomposition of organic compounds. In this paper, we present the third heteropolyoxotantalate under conventional synthetic conditions in the presence of hydrogen peroxide. The compound has been thoroughly characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy, thermogravimetric analysis and powder X-ray diffraction. The polyanion incorporates two 3-peroxotantalo-2-phosphate clusters that are linked together by four oxygen bridges. In addition, the photocatalytic activities of the title compound 1a were investigated. After 270 min irradiation, about 90% of Rhodamine B (RhB) was removed in the presence of 1a while the degradation of RhB could be negligible in the absence of 1a , indicating it can be a promising catalyst candidate for decolorization of organic dyes. Also, photocatalytic experiment for hydrogen generation was studied, and the results show that the H 2 evolution rate is 3383 µmol h −1 g −1 for compound 1a (100 mg) over 6 h with the corresponding turnover number of 432.