4 March 2024 in Nature Communications
Artificial Intelligence (AI) is currently experiencing a bloom driven by deep learning (DL) techniques, which rely on networks of connected simple computing units operating in parallel. The low communication bandwidth between memory and processing units in conventional von Neumann machines does not support the requirements of emerging applications that rely extensively on large sets of data. More recent computing paradigms, such as high parallelization and near-memory computing, help alleviate the data communication bottleneck to some extent, but paradigm- shifting concepts are required. Memristors, a novel beyond-complementary metal-oxide-semiconductor (CMOS) technology, are a promising choice for memory devices due to their unique intrinsic device-level properties, enabling both storing and computing with a small, massively-parallel footprint at low power. Theoretically, this directly translates to a major boost in energy efficiency and computational throughput, but various practical challenges remain. In this work we review the latest efforts for achieving hardware-based memristive artificial neural networks (ANNs), describing with detail the working principia of each block and the different design alternatives with their own advantages and disadvantages, as well as the tools required for accurate estimation of performance metrics. Ultimately, we aim to provide a comprehensive protocol of the materials and methods involved in memristive neural networks to those aiming to start working in this field and the experts looking for a holistic approach.
28 March 2024 in Journal of Physics: Materials
Interconnect materials with ultralow dielectric constant, and good thermal and mechanical properties are crucial for the further miniaturization of electronic devices. Recently, it has been demonstrated that ultrathin amorphous boron nitride (aBN) films have a very low dielectric constant, high density (above 2.1 g cm−3), high thermal stability, and mechanical properties. The excellent properties of aBN derive from the nature and degree of disorder, which can be controlled at fabrication, allowing tuning of the physical properties for desired applications. Here, we report an improvement in the stability and mechanical properties of aBN upon hydrogen doping. With the introduction of a Gaussian approximation potential for atomistic simulations, we investigate the changing morphology of aBN with varying H doping concentrations. We found that for 8 at% of H doping, the concentration of sp 3-hybridized atoms reaches to a maximum which leads to an improvement of thermal stability and mechanical properties by 20%. These results will be a guideline for experimentalists and process engineers to tune the growth conditions of aBN films for numerous applications.
4 February 2026 in IEEE Transactions on Electron Devices
We investigate the impact of a monolithic 3-D (M3D) integration process-critical $400~^{\circ } $ C postprocessing forming gas annealing (FGA) on the electrical performance, reliability, and defect evolution of oxide-channel thin-film transistors (TFTs), combining systematic experiments with density-functional-theory (DFT)-based liquid-quench molecular-dynamics (MD) simulations. Indium tungsten oxide (IWO) TFTs are employed as a model system and encapsulated with a thin 3-nm Al2O3/3 nm HfO2 hybrid layer that effectively suppresses external hydrogen ingress. We reveal a nonmonotonic evolution of device behavior during FGA, governed by initial densification followed by partial crystallization. Short-duration FGA (10 min) induces channel densification and the formation of shallow, delocalized defect states, leading to pronounced positive bias temperature instability (PBTI) degradation and the emergence of a characteristic transfer-curve “kink.” With prolonged annealing (>40 min), partial crystallization of the oxide channel occurs, stabilizing hydrogen in deep, localized defect states, suppressing hydrogen mobility, and restoring device reliability. As a result, the PBTI shift is reduced to 10.4 mV after 2000 s of stress, accompanied by complete elimination of the transfer-curve kink. These findings provide a mechanistic understanding of hydrogen–defect interactions during high-temperature postprocessing FGA and demonstrate that appropriate hydrogen-blocking encapsulation enables oxide-channel TFT integration without compromising electrical performance or reliability.
28 September 2026 in Applied Physics Letters
This work reports back-end-of-line (BEOL) compatible, thin-film transistors (TFTs) with sub-10 nm tungsten-doped tin oxide (TWO) channels deposited by atomic layer deposition (ALD) at 150 °C. TFTs with undoped SnOx, undoped WOx, and W-doped SnOx channels with variable W concentrations were investigated. TFT with 10% W doping exhibited the best electrostatic control and overall device performance. Post-fabrication O2 annealing at 300 °C for 5 min significantly enhanced device characteristics, reducing the subthreshold swing (SS) by nearly 2×, increasing the Ion/Ioff ratio from 107 to 109, and decreasing hysteresis by nearly 3× and positive bias stress-induced threshold shift by over 2× to a low value of 93 mV at a stress field of 4 MV/cm. Kinetic Monte Carlo simulations using GinestraTM support the experimental observations and attribute the bias instability to charge trapping in the gate dielectric and at the interface. This work demonstrates low-temperature ALD-grown TWO TFTs as a promising indium-free platform for BEOL and monolithic 3D integration.
1 July 2026 in Nature Materials