Smart radiative cooling devices based on thermochromic materials such as vanadium dioxide (VO 2 ) are of practical interest for temperature regulation and artificial homeostasis, i.e., maintaining stable equilibrium conditions for survival, both in terrestrial and space applications. In traditional solar reflector configurations, solar absorption in the VO 2 layer is a performance limiting factor due to the multiple reflections of sunlight in the stack. Here, we demonstrate a visually transparent, smart radiator panel with reduced solar absorption. An Al‐doped ZnO transparent conducting oxide layer acts as a frequency selective infrared back‐reflector with high transmission of solar radiation. In this study we make use of high‐quality VO 2 thin films deposited using atomic layer deposition and optimized annealing process. Patterning of the VO 2 layer into a metasurface results in a further reduction of the solar absorption parameter α to around 0.3, while exhibiting a thermal emissivity contrast Δ ε of 0.26 by exploiting plasmonic enhancement effects. The VO 2 metasurface provides a visual spectrum transmission of up to 62%, which is of interest for a range of applications requiring visual transparency. The transparent smart metasurface thermal emitter offers a new approach for thermal management in both space and terrestrial radiative cooling scenarios.
The unique structural transition of VO2 between dielectric and metallic phases has significant potential in optical and electrical applications ranging from volatile switches and neuromorphic computing to smart devices for thermochromic control and radiative cooling. Critical condition for their widespread implementation is scalable deposition method and reduction of the phase transition to near room temperature. Here, a W:VO2 process based on atomic layer deposition (ALD) is presented that enables precise control of W‐doping at the few percent level, resulting in a viable controllable process with sufficient W incorporation into VO2 to reduce the phase transition to room temperature. It is demonstrated that the incorporation of 1.63 at.% W through ALD growth leads to a state‐of‐the‐art phase transition at 32 °C with emissivity contrast between the low‐temperature and high‐temperature phase exceeding 40% in a metasurface‐based radiative cooling device configuration. The process is shown to be viable on 200 mm silicon substrates as well as flexible polyimide films. The full and self‐consistent temperature‐dependent characterization of the W‐doped VO2 using spectroscopic ellipsometry, electrical conductivity, mid‐wave infrared camera, and Fourier transform infrared emissivity, allows for a fully validated material model for the theoretical design of various smart and switchable device applications.
Bolometers rely upon the temperature coefficient of resistance (TCR) of their underpinning sensing layer to detect infrared radiation. Vanadium dioxide (VO2) exhibits a very large, but abrupt TCR associated with its monoclinic to rutile phase transition. W-doping of VO2 lowers and broadens its transition temperature, and by combining multiple discrete W:VO2 layers, a sensing layer can be created with an extended temperature operation region. Herein, we report such a multilayer W:VO2 thin film by atomic layer deposition (ALD). The film displays an average TCR of −9.5 (±3.5) %K−1 from 30°C to 60°C. A sensing layer consisting of 10 individual W:VO2 layers is simulated with a multi-objective genetic algorithm (MOGA) for maximum average TCR (μ) and minimum variation (σ) across an extended target temperature range producing an optimized layer structure at max () with average TCR response of −6.7 (±0.9) %K−1 from 20°C to 70°C. This work highlights the potential for the broader application of uncooled bolometers.