23 November 2021 in IEEE Transactions on Industrial Electronics
In this article, a novel radial–axial (RA) flux switching permanent magnet generator (FSPMG) is introduced. In contrast to other RA flux machines, a major advantage of this generator is its implementation only by the use of conventional nonoriented electrical steel sheets, even though the flux linkage of the novel RA-FSPMG has a 3-D path. Besides that, it benefits from the flux concentration strategy and a passive rotor. A concrete foundation of the novel RA-FSPMG is provided, in which, the 3D-Flux path is described, working principles are discussed, and power-sizing equation is derived. No-load characteristics and the full-load performance of an optimized RA-FSPMG are investigated in contrast to an optimized double stator radial FSPMG and an optimized double stator axial FSPMG with similar volume, number of permanent magnets (PMs), and electrical loading. The results show the competitiveness of the novel RA-FSPMG, in particular, in the output power and the required copper mass. Furthermore, the PM demagnetization possibility and the rotor axial pull force of the optimized RA-FSPMG are investigated, in detail. All discussions are supported by the 3-D finite element analysis and experimental results.
30 January 2025 in IET Electric Power Applications
This study proposes a modified partitioned‐stator flux‐switching permanent magnet (PS‐FSPM) machine and reduces the permanent magnet usage in conventional PS‐FSPM machines. To achieve this goal, the stators of the conventional PS‐FSPM with outer‐armature/inner‐PM (OA/IPM PS‐FSPM) structure are swapped to realise a PS‐FSPM with outer‐PM/inner‐armature (OPM/IA PS‐FSPM) design. The machine topology along with the operating principles are described in detail, and an analytical airgap permeance model is introduced for the proposed machine. The number of rotor modules, the widths of the magnets and rotor modules, as well as the split ratio (SR), are optimised through sensitivity analysis to achieve higher torque density and reduced torque ripple, compared with the conventional structure. Moreover, a flux barrier in the exterior surface of the outer stator is adopted to improve the proposed structure to reach a higher flux concentration in the airgap and reduce iron volume consumption. The thermal analysis results using the computational fluid dynamics modelling indicate that the temperatures of both insulation and permanent magnets remain within specified operating limits. Finally, apart from the finite element analysis (FEA), an experimental study is performed to evaluate the feasibility of fabricating a machine equipped with a high number of rotor modular teeth.