1 March 2023 in Journal of Structural Engineering
Many numerical simulation methods, such as finite-element analysis, were originally formulated to run serially or in parallel on central processing units (CPUs). However, computer engineering has seen a paradigm shift toward massive parallelism using graphics processing units (GPUs), which have become the default accelerators in many data-driven scientific disciplines outside of civil engineering. This state-of-the-art review highlights the challenges and practicalities of GPU-accelerating nonlinear dynamic analyses for civil structural problems. To demonstrate the feasibility of a fully GPU-accelerated finite-element analysis, a GPU-based program for linear-elastic dynamic analysis was implemented, where all stages of the analysis were ported to the GPU. Observed speedups were 115 times that of an equivalent CPU-driven analysis for model degrees of freedom (dof). Importantly, the computational time for the assembly and update levels of the analyses were nearly independent of the number of dof. High-resolution simulations of complex structures can be computationally expensive, but these results and advances in other fields suggest that some levels of the finite-element analysis of civil structures could be accelerated using GPUs at increased model resolution with little increase in computational cost, demonstrating the potential for GPU-accelerated computing. However, compared to other GPU-accelerated finite-element analysis applications, the dynamic analysis of civil structures is subject to unique challenges that need to be addressed before GPU acceleration can be fully realized. Aspects of simulating the response of civil structures considering nonlinear response under extreme loading may not be immediately amenable to GPU acceleration; e.g., the use of many differing element formulations within a model, potential for inelastic response and varying degrees of nonlinearity across elements, and traditional reliance on implicit integration schemes with direct solvers. The shift to GPUs is part of a larger movement toward specialized hardware using fine-grained parallelism, and structural engineers need to address these challenges as these emerging technologies become more prevalent.
14 May 2026 in Ocean Engineering
27 December 2022 in JAPAN ARCHITECTURAL REVIEW
A computational study was conducted to examine the seismic performance of steel moment‐resisting frames (MRFs) provided with chevron concentric braces. Such steel systems are widely used for buildings in Japan. Nonlinear finite‐element‐method models were validated against data and observations from previously tested chevron‐braced MRF specimens. The validated models were used to conduct a parametric study to understand how the cyclic‐loading performance of chevron‐braced MRFs may be affected by the torsional and translational restraint of the beam intersected by braces, the relative strength of the beam with respect to the braces, and the type of bracing connection. The results suggest that the lack of bracing of the beam intersected by braces may not be detrimental to the global hysteretic behavior of the structural system, although out‐of‐plane buckling of the braces can cause severe inelastic lateral‐torsional deformation of the beam. The torsional moment delivered by the braces was evaluated for the unfavorable arrangement where the bracing connections are rigid, and the braces are oriented to buckle out of the plane. A design procedure was examined that can account for the dependency of the energy dissipation mechanism on the cyclic loading history.
29 June 2026 in Wind Energy and Engineering Research
1 August 2025 in Journal of Structural Engineering