This article presents an electro-absorption modulator (EAM)-based single-mode (SM) 50-Gb/s non return to zero (NRZ) Si-photonic optical link in a 16-nm FinFET. The EAM device is modeled to include its electrical and optical properties. The transmitter (TX) uses T-coil based over-peaking to improve modulation efficiency and relax transimpedance amplifier's (TIA's) bandwidth and noise requirement. The receiver (RX) uses a three-stage TIA with T-coils to improve bandwidth. The link sensitivity is -10.9-dBm optical modulation amplitude (OMA) at bit error rate (BER) < 10⁻¹² with 2-dB link margin at 50 Gb/s. The combined power efficiency of the RX, TX, and clocking is 3.16 pJ/bit and the external laser consumes 1.15 pJ/bit with 10% wall-plug efficiency.
23 January 2019 in IEEE Solid-State Circuits Letters
This letter describes an inverter-based analog receiver frontend that was evaluated within a complete ADC-based 56 Gb/s PAM-4 wireline transceiver system. The front-end contains hybrid continuous-time linear equalizers (CTLE) with low-and high-frequency peaking as well as inverter-based programmable gain amplifiers (PGA) that serve as buffers for the 32x time-interleaved SAR ADC. The inductorless design achieves high bandwidth through a reduced number of equalizer stages (with fewer parasitic poles) and active peaking techniques. The transceiver that contains the AFE achieves <10-6 BER over a backplane channel with 35 dB loss at 14 GHz and with 2 mVrms input crosstalk noise. The AFE core occupies 0.00425 mm2 in 16 nm FinFET CMOS and consumes 165 mW.